This is the latest recevied telemetry packets stored in our database for station/object W4KEL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770051271 | 12.34 | 3.62 | 0 | 0 | 0 |
| 1770047678 | 12.34 | 1.67 | 0 | 0 | 0 |
| 1770045876 | 12.31 | 0.2 | 0 | 0 | 0 |
| 1770044077 | 12.31 | -0.29 | 0 | 0 | 0 |
| 1770042279 | 12.34 | -2.24 | 0 | 0 | 0 |
| 1770040486 | 12.34 | -4.2 | 0 | 0 | 0 |
| 1770038680 | 12.34 | -4.69 | 0 | 0 | 0 |
| 1770036880 | 12.34 | -4.69 | 0 | 0 | 0 |
| 1770035081 | 12.34 | -4.2 | 0 | 0 | 0 |
| 1770033292 | 12.34 | -4.2 | 0 | 0 | 0 |
| 1770031482 | 12.34 | -3.71 | 0 | 0 | 0 |
| 1770029684 | 12.36 | -3.22 | 0 | 0 | 0 |
| 1770027885 | 12.34 | -2.24 | 0 | 0 | 0 |
| 1770026086 | 12.36 | -1.76 | 0 | 0 | 0 |
| 1770024288 | 12.36 | -1.27 | 0 | 0 | 0 |
| 1770022489 | 12.34 | -0.78 | 0 | 0 | 0 |
| 1770020691 | 12.36 | -0.78 | 0 | 0 | 0 |
| 1770018892 | 12.36 | -0.29 | 0 | 0 | 0 |
| 1770017094 | 12.36 | -0.29 | 0 | 0 | 0 |
| 1770015295 | 12.36 | -0.29 | 0 | 0 | 0 |
| 1770011698 | 12.36 | -0.29 | 0 | 0 | 0 |
| 1770009908 | 12.36 | -0.29 | 0 | 0 | 0 |
| 1770008106 | 12.36 | -0.29 | 0 | 0 | 0 |
| 1770006301 | 12.36 | -0.29 | 0 | 0 | 0 |
| 1770004506 | 12.36 | 0.2 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)