This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785127149 | 283 Count | 573 Count | 134 Count | 0 VDC | 4 VDC |
| 1785126246 | 282 Count | 571 Count | 134 Count | 0 VDC | 4 VDC |
| 1785125344 | 280 Count | 566 Count | 133 Count | 0 VDC | 4 VDC |
| 1785124441 | 279 Count | 564 Count | 133 Count | 0 VDC | 4 VDC |
| 1785123538 | 277 Count | 559 Count | 132 Count | 0 VDC | 4 VDC |
| 1785122635 | 276 Count | 557 Count | 132 Count | 0 VDC | 4 VDC |
| 1785121732 | 274 Count | 553 Count | 131 Count | 0 VDC | 4 VDC |
| 1785120829 | 272 Count | 548 Count | 130 Count | 0 VDC | 4 VDC |
| 1785119926 | 270 Count | 542 Count | 129 Count | 0 VDC | 4 VDC |
| 1785119023 | 268 Count | 538 Count | 128 Count | 0 VDC | 4 VDC |
| 1785118120 | 266 Count | 526 Count | 127 Count | 0 VDC | 4 VDC |
| 1785117217 | 264 Count | 521 Count | 126 Count | 0 VDC | 4 VDC |
| 1785116314 | 262 Count | 516 Count | 125 Count | 0 VDC | 4 VDC |
| 1785115411 | 261 Count | 515 Count | 125 Count | 0 VDC | 4 VDC |
| 1785114508 | 259 Count | 510 Count | 124 Count | 0 VDC | 4 VDC |
| 1785113675 | 253 Count | 503 Count | 123 Count | 0 VDC | 4 VDC |
| 1785112772 | 251 Count | 498 Count | 122 Count | 0 VDC | 4 VDC |
| 1785111869 | 249 Count | 493 Count | 121 Count | 0 VDC | 4 VDC |
| 1785110966 | 247 Count | 488 Count | 120 Count | 0 VDC | 4 VDC |
| 1785110063 | 245 Count | 483 Count | 119 Count | 0 VDC | 4 VDC |
| 1785109160 | 243 Count | 478 Count | 118 Count | 0 VDC | 4 VDC |
| 1785108257 | 241 Count | 473 Count | 117 Count | 0 VDC | 4 VDC |
| 1785107354 | 240 Count | 469 Count | 117 Count | 0 VDC | 4 VDC |
| 1785106451 | 238 Count | 464 Count | 116 Count | 0 VDC | 4 VDC |
| 1785105548 | 236 Count | 459 Count | 115 Count | 0 VDC | 4 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 1, 0
V_Ext: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)