This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764274958 | 0 Count | 966 Count | 0 Count | 4.39 VDC | 0 VDC |
| 1764274658 | 0 Count | 957 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1764274358 | 0 Count | 948 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1764274058 | 0 Count | 935 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1764273758 | 0 Count | 926 Count | 0 Count | 4.48 VDC | 0 VDC |
| 1764273458 | 0 Count | 921 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764273157 | 0 Count | 913 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1764272857 | 0 Count | 905 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1764272557 | 0 Count | 900 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1764272266 | 0 Count | 892 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764271966 | 0 Count | 885 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764271666 | 0 Count | 881 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764271366 | 0 Count | 872 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764271066 | 0 Count | 865 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764270766 | 0 Count | 859 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764270466 | 0 Count | 853 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764270166 | 0 Count | 846 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764269866 | 0 Count | 842 Count | 0 Count | 4.48 VDC | 0 VDC |
| 1764269566 | 0 Count | 836 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764269266 | 0 Count | 828 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764268965 | 0 Count | 823 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1764268666 | 0 Count | 815 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1764268365 | 0 Count | 805 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1764268065 | 0 Count | 800 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1764267765 | 0 Count | 794 Count | 0 Count | 4.27 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)