This is the latest recevied telemetry packets stored in our database for station/object 9W2RDY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770217945 | 3.69 VDC | 2.26 VDC | 0 | 0 | 0 |
| 1770217045 | 3.77 VDC | 2.3 VDC | 0 | 0 | 0 |
| 1770216145 | 3.83 VDC | 2.34 VDC | 0 | 0 | 0 |
| 1770215244 | 3.86 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1770214343 | 3.45 VDC | 2.28 VDC | 0 | 0 | 0 |
| 1770214074 | 3.83 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1770213172 | 3.83 VDC | 2.34 VDC | 0 | 0 | 0 |
| 1770212272 | 3.86 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1770211372 | 3.87 VDC | 2.36 VDC | 0 | 0 | 0 |
| 1770210472 | 3.85 VDC | 2.38 VDC | 0 | 0 | 0 |
| 1770209572 | 3.82 VDC | 2.38 VDC | 0 | 0 | 0 |
| 1770208670 | 3.94 VDC | 2.42 VDC | 0 | 0 | 0 |
| 1770208478 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770207578 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770206678 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770205778 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770204877 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770203977 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770203077 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770202177 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770201276 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770200376 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770199476 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770198576 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
| 1770197676 | 4.03 VDC | 2.46 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)