This is the latest recevied telemetry packets stored in our database for station/object SQ2MO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774471166 | 175 Count | 719 Count | 115 Count | 0 VDC | 0 VDC |
| 1774470565 | 172 Count | 708 Count | 113 Count | 0 VDC | 0 VDC |
| 1774469964 | 169 Count | 700 Count | 111 Count | 0 VDC | 0 VDC |
| 1774469364 | 166 Count | 689 Count | 109 Count | 0 VDC | 0 VDC |
| 1774468763 | 163 Count | 676 Count | 107 Count | 0 VDC | 0 VDC |
| 1774468162 | 160 Count | 668 Count | 105 Count | 0 VDC | 0 VDC |
| 1774467561 | 158 Count | 657 Count | 104 Count | 0 VDC | 0 VDC |
| 1774466961 | 155 Count | 646 Count | 102 Count | 0 VDC | 0 VDC |
| 1774466360 | 152 Count | 631 Count | 100 Count | 0 VDC | 0 VDC |
| 1774465759 | 149 Count | 620 Count | 98 Count | 0 VDC | 0 VDC |
| 1774465158 | 146 Count | 609 Count | 96 Count | 0 VDC | 0 VDC |
| 1774464557 | 143 Count | 601 Count | 94 Count | 0 VDC | 0 VDC |
| 1774463957 | 141 Count | 588 Count | 93 Count | 0 VDC | 0 VDC |
| 1774463356 | 138 Count | 576 Count | 91 Count | 0 VDC | 0 VDC |
| 1774462755 | 136 Count | 569 Count | 90 Count | 0 VDC | 0 VDC |
| 1774462154 | 133 Count | 559 Count | 88 Count | 0 VDC | 0 VDC |
| 1774461553 | 131 Count | 548 Count | 87 Count | 0 VDC | 0 VDC |
| 1774460953 | 121 Count | 523 Count | 78 Count | 0 VDC | 0 VDC |
| 1774460352 | 111 Count | 486 Count | 69 Count | 0 VDC | 0 VDC |
| 1774459751 | 105 Count | 463 Count | 64 Count | 0 VDC | 0 VDC |
| 1774459151 | 104 Count | 458 Count | 64 Count | 0 VDC | 0 VDC |
| 1774458550 | 103 Count | 452 Count | 64 Count | 0 VDC | 0 VDC |
| 1774457949 | 102 Count | 445 Count | 64 Count | 0 VDC | 0 VDC |
| 1774457348 | 101 Count | 442 Count | 64 Count | 0 VDC | 0 VDC |
| 1774456747 | 85 Count | 400 Count | 49 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 1, 0
V_Ext: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)