This is the latest recevied telemetry packets stored in our database for station/object SP8AA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1768829877 | 347 Count | 788 Count | 328 Count | 4.16 VDC | 0.14 VDC |
| 1768828974 | 329 Count | 745 Count | 311 Count | 4.14 VDC | 0.14 VDC |
| 1768828071 | 316 Count | 708 Count | 299 Count | 4.13 VDC | 0.14 VDC |
| 1768827169 | 304 Count | 674 Count | 288 Count | 4.12 VDC | 0.14 VDC |
| 1768826266 | 284 Count | 627 Count | 269 Count | 4.07 VDC | 0.14 VDC |
| 1768825363 | 271 Count | 589 Count | 257 Count | 4.02 VDC | 0.14 VDC |
| 1768824460 | 253 Count | 546 Count | 240 Count | 3.97 VDC | 0.14 VDC |
| 1768823557 | 239 Count | 503 Count | 227 Count | 3.93 VDC | 0.14 VDC |
| 1768822655 | 218 Count | 450 Count | 207 Count | 3.9 VDC | 0.14 VDC |
| 1768821752 | 202 Count | 409 Count | 192 Count | 3.69 VDC | 0.14 VDC |
| 1768820849 | 177 Count | 356 Count | 168 Count | 3.74 VDC | 0.14 VDC |
| 1768819946 | 137 Count | 286 Count | 129 Count | 3.75 VDC | 0.14 VDC |
| 1768819043 | 106 Count | 224 Count | 99 Count | 3.69 VDC | 0.14 VDC |
| 1768818141 | 65 Count | 142 Count | 59 Count | 3.74 VDC | 0.14 VDC |
| 1768801926 | 437 Count | 1045 Count | 419 Count | 338 VDC | 7 VDC |
| 1768801023 | 412 Count | 982 Count | 395 Count | 340 VDC | 7 VDC |
| 1768800120 | 386 Count | 920 Count | 370 Count | 341 VDC | 7 VDC |
| 1768798315 | 329 Count | 790 Count | 315 Count | 343 VDC | 7 VDC |
| 1768797412 | 302 Count | 720 Count | 289 Count | 344 VDC | 7 VDC |
| 1768796509 | 271 Count | 644 Count | 259 Count | 345 VDC | 7 VDC |
| 1768795606 | 239 Count | 571 Count | 228 Count | 345 VDC | 7 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)