This is the latest recevied telemetry packets stored in our database for station/object SQ9IKM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783244850 | 117 Count | 418 Count | 52 Count | 0 VDC | 0 VDC |
| 1783243949 | 116 Count | 416 Count | 52 Count | 0 VDC | 0 VDC |
| 1783243048 | 114 Count | 413 Count | 51 Count | 0 VDC | 0 VDC |
| 1783242148 | 112 Count | 407 Count | 50 Count | 0 VDC | 0 VDC |
| 1783241247 | 111 Count | 406 Count | 50 Count | 0 VDC | 0 VDC |
| 1783240346 | 110 Count | 393 Count | 50 Count | 0 VDC | 0 VDC |
| 1783239446 | 108 Count | 391 Count | 49 Count | 0 VDC | 0 VDC |
| 1783238545 | 107 Count | 390 Count | 49 Count | 0 VDC | 0 VDC |
| 1783237644 | 105 Count | 385 Count | 48 Count | 0 VDC | 0 VDC |
| 1783236761 | 104 Count | 381 Count | 48 Count | 0 VDC | 0 VDC |
| 1783235859 | 102 Count | 376 Count | 47 Count | 0 VDC | 0 VDC |
| 1783234959 | 100 Count | 371 Count | 46 Count | 0 VDC | 0 VDC |
| 1783234058 | 99 Count | 366 Count | 46 Count | 0 VDC | 0 VDC |
| 1783233158 | 97 Count | 365 Count | 45 Count | 0 VDC | 0 VDC |
| 1783232257 | 96 Count | 363 Count | 45 Count | 0 VDC | 0 VDC |
| 1783231356 | 95 Count | 363 Count | 45 Count | 0 VDC | 0 VDC |
| 1783230456 | 94 Count | 359 Count | 45 Count | 0 VDC | 0 VDC |
| 1783229555 | 93 Count | 354 Count | 45 Count | 0 VDC | 0 VDC |
| 1783227754 | 90 Count | 344 Count | 44 Count | 0 VDC | 0 VDC |
| 1783226853 | 87 Count | 335 Count | 42 Count | 0 VDC | 0 VDC |
| 1783225952 | 86 Count | 324 Count | 42 Count | 0 VDC | 0 VDC |
| 1783225052 | 85 Count | 318 Count | 42 Count | 0 VDC | 0 VDC |
| 1783224151 | 84 Count | 315 Count | 42 Count | 0 VDC | 0 VDC |
| 1783223250 | 82 Count | 309 Count | 41 Count | 0 VDC | 0 VDC |
| 1783222349 | 80 Count | 304 Count | 40 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)