This is the latest recevied telemetry packets stored in our database for station/object SP4SAS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788991721 | 508 Count | 922 Count | 423 Count | 0 VDC | 0 VDC |
| 1788990821 | 500 Count | 911 Count | 416 Count | 0 VDC | 0 VDC |
| 1788989920 | 491 Count | 897 Count | 408 Count | 0 VDC | 0 VDC |
| 1788989019 | 484 Count | 887 Count | 402 Count | 0 VDC | 0 VDC |
| 1788988119 | 477 Count | 877 Count | 396 Count | 0 VDC | 0 VDC |
| 1788987218 | 472 Count | 869 Count | 392 Count | 0 VDC | 0 VDC |
| 1788986317 | 467 Count | 861 Count | 388 Count | 0 VDC | 0 VDC |
| 1788985416 | 462 Count | 852 Count | 384 Count | 0 VDC | 0 VDC |
| 1788984516 | 455 Count | 843 Count | 378 Count | 0 VDC | 0 VDC |
| 1788983615 | 449 Count | 834 Count | 373 Count | 0 VDC | 0 VDC |
| 1788982714 | 444 Count | 826 Count | 369 Count | 0 VDC | 0 VDC |
| 1788981814 | 439 Count | 816 Count | 365 Count | 0 VDC | 0 VDC |
| 1788980913 | 434 Count | 807 Count | 361 Count | 0 VDC | 0 VDC |
| 1788980012 | 429 Count | 799 Count | 357 Count | 0 VDC | 0 VDC |
| 1788979112 | 423 Count | 789 Count | 352 Count | 0 VDC | 0 VDC |
| 1788978211 | 417 Count | 778 Count | 347 Count | 0 VDC | 0 VDC |
| 1788977310 | 412 Count | 767 Count | 343 Count | 0 VDC | 0 VDC |
| 1788976410 | 405 Count | 754 Count | 337 Count | 0 VDC | 0 VDC |
| 1788975509 | 399 Count | 744 Count | 332 Count | 0 VDC | 0 VDC |
| 1788974608 | 392 Count | 734 Count | 326 Count | 0 VDC | 0 VDC |
| 1788973707 | 386 Count | 725 Count | 321 Count | 0 VDC | 0 VDC |
| 1788972807 | 379 Count | 715 Count | 315 Count | 0 VDC | 0 VDC |
| 1788971906 | 373 Count | 706 Count | 310 Count | 0 VDC | 0 VDC |
| 1788971021 | 362 Count | 693 Count | 304 Count | 0 VDC | 0 VDC |
| 1788970120 | 356 Count | 684 Count | 299 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)