This is the latest recevied telemetry packets stored in our database for station/object SP8SOB-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1784359195 | 330 Count | 281 Count | 94 Count | 0 VDC | 0 VDC |
| 1784358295 | 329 Count | 281 Count | 94 Count | 0 VDC | 0 VDC |
| 1784357394 | 328 Count | 281 Count | 94 Count | 0 VDC | 0 VDC |
| 1784356494 | 327 Count | 281 Count | 94 Count | 0 VDC | 0 VDC |
| 1784354707 | 321 Count | 281 Count | 94 Count | 0 VDC | 0 VDC |
| 1784353806 | 320 Count | 281 Count | 94 Count | 0 VDC | 0 VDC |
| 1784352906 | 319 Count | 280 Count | 94 Count | 0 VDC | 0 VDC |
| 1784352006 | 318 Count | 280 Count | 94 Count | 0 VDC | 0 VDC |
| 1784351104 | 317 Count | 278 Count | 94 Count | 0 VDC | 0 VDC |
| 1784350204 | 316 Count | 277 Count | 94 Count | 0 VDC | 0 VDC |
| 1784349303 | 315 Count | 276 Count | 94 Count | 0 VDC | 0 VDC |
| 1784348403 | 314 Count | 275 Count | 94 Count | 0 VDC | 0 VDC |
| 1784347502 | 313 Count | 273 Count | 94 Count | 0 VDC | 0 VDC |
| 1784345701 | 311 Count | 271 Count | 94 Count | 0 VDC | 0 VDC |
| 1784344807 | 310 Count | 271 Count | 94 Count | 0 VDC | 0 VDC |
| 1784343900 | 309 Count | 270 Count | 94 Count | 0 VDC | 0 VDC |
| 1784343008 | 308 Count | 270 Count | 94 Count | 0 VDC | 0 VDC |
| 1784342099 | 307 Count | 270 Count | 94 Count | 0 VDC | 0 VDC |
| 1784340297 | 305 Count | 270 Count | 94 Count | 0 VDC | 0 VDC |
| 1784339397 | 304 Count | 270 Count | 94 Count | 0 VDC | 0 VDC |
| 1784338496 | 303 Count | 270 Count | 94 Count | 0 VDC | 0 VDC |
| 1784337595 | 302 Count | 270 Count | 94 Count | 0 VDC | 0 VDC |
| 1784336695 | 301 Count | 270 Count | 94 Count | 0 VDC | 0 VDC |
| 1784335794 | 300 Count | 268 Count | 94 Count | 0 VDC | 0 VDC |
| 1784334894 | 299 Count | 267 Count | 94 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)