This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1771831975 | 13.37 Volts | 44.8 Deg.F | 0 | 0 | 0 |
| 1771830183 | 13.37 Volts | 44.8 Deg.F | 0 | 0 | 0 |
| 1771828393 | 13.37 Volts | 46.56 Deg.F | 0 | 0 | 0 |
| 1771826600 | 13.34 Volts | 45.68 Deg.F | 0 | 0 | 0 |
| 1771823019 | 13.4 Volts | 45.68 Deg.F | 0 | 0 | 0 |
| 1771819436 | 13.37 Volts | 46.56 Deg.F | 0 | 0 | 0 |
| 1771815854 | 13.4 Volts | 46.56 Deg.F | 0 | 0 | 0 |
| 1771814063 | 13.4 Volts | 47.44 Deg.F | 0 | 0 | 0 |
| 1771812271 | 13.43 Volts | 48.32 Deg.F | 0 | 0 | 0 |
| 1771806898 | 13.46 Volts | 51.84 Deg.F | 0 | 0 | 0 |
| 1771805106 | 13.46 Volts | 52.72 Deg.F | 0 | 0 | 0 |
| 1771803316 | 13.49 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1771801524 | 13.55 Volts | 53.6 Deg.F | 0 | 0 | 0 |
| 1771797942 | 13.46 Volts | 54.48 Deg.F | 0 | 0 | 0 |
| 1771796151 | 13.52 Volts | 50.08 Deg.F | 0 | 0 | 0 |
| 1771794360 | 13.58 Volts | 46.56 Deg.F | 0 | 0 | 0 |
| 1771792570 | 13.52 Volts | 45.68 Deg.F | 0 | 0 | 0 |
| 1771790778 | 13.43 Volts | 44.8 Deg.F | 0 | 0 | 0 |
| 1771788989 | 13.4 Volts | 44.8 Deg.F | 0 | 0 | 0 |
| 1771785407 | 13.4 Volts | 48.32 Deg.F | 0 | 0 | 0 |
| 1771780035 | 13.4 Volts | 44.8 Deg.F | 0 | 0 | 0 |
| 1771778246 | 13.37 Volts | 43.04 Deg.F | 0 | 0 | 0 |
| 1771772874 | 13.31 Volts | 42.16 Deg.F | 0 | 0 | 0 |
| 1771765712 | 13.34 Volts | 43.04 Deg.F | 0 | 0 | 0 |
| 1771758551 | 13.34 Volts | 43.04 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0.48
Temp: 0, 0.88, -470
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)