This is the latest recevied telemetry packets stored in our database for station/object EA1FBU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754253098 | 4.35 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1754252198 | 4.36 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1754251297 | 4.34 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1754250397 | 4.37 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1754249497 | 4.37 VDC | 1.88 VDC | 0 | 0 | 0 |
| 1754248597 | 4.36 VDC | 3.14 VDC | 0 | 0 | 0 |
| 1754247697 | 4.36 VDC | 3.76 VDC | 0 | 0 | 0 |
| 1754246797 | 4.36 VDC | 3.16 VDC | 0 | 0 | 0 |
| 1754245897 | 4.35 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1754244997 | 4.36 VDC | 4.36 VDC | 0 | 0 | 0 |
| 1754244096 | 4.35 VDC | 4.68 VDC | 0 | 0 | 0 |
| 1754243196 | 4.35 VDC | 4.82 VDC | 0 | 0 | 0 |
| 1754242296 | 4.37 VDC | 5 VDC | 0 | 0 | 0 |
| 1754241395 | 4.35 VDC | 5.06 VDC | 0 | 0 | 0 |
| 1754240495 | 4.35 VDC | 5.06 VDC | 0 | 0 | 0 |
| 1754239594 | 4.36 VDC | 5.14 VDC | 0 | 0 | 0 |
| 1754238694 | 4.36 VDC | 5.16 VDC | 0 | 0 | 0 |
| 1754237793 | 4.34 VDC | 5.06 VDC | 0 | 0 | 0 |
| 1754236893 | 4.34 VDC | 5.16 VDC | 0 | 0 | 0 |
| 1754235993 | 4.35 VDC | 5.16 VDC | 0 | 0 | 0 |
| 1754235093 | 4.35 VDC | 5.2 VDC | 0 | 0 | 0 |
| 1754234193 | 4.35 VDC | 5.12 VDC | 0 | 0 | 0 |
| 1754233292 | 4.36 VDC | 5.22 VDC | 0 | 0 | 0 |
| 1754232392 | 4.36 VDC | 5.22 VDC | 0 | 0 | 0 |
| 1754231492 | 4.36 VDC | 5.2 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)