This is the latest recevied telemetry packets stored in our database for station/object SP2UUU-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792878328 | 461 Count | 551 Count | 461 Count | 4.21 VDC | 0.2 VDC |
| 1792876528 | 459 Count | 549 Count | 459 Count | 4.16 VDC | 0.16 VDC |
| 1792874728 | 457 Count | 547 Count | 457 Count | 4.2 VDC | 0.16 VDC |
| 1792872928 | 455 Count | 544 Count | 455 Count | 4.18 VDC | 0.18 VDC |
| 1792871127 | 453 Count | 542 Count | 453 Count | 4.16 VDC | 0.16 VDC |
| 1792869327 | 451 Count | 540 Count | 451 Count | 4.2 VDC | 0.18 VDC |
| 1792867527 | 449 Count | 538 Count | 449 Count | 4.17 VDC | 0.16 VDC |
| 1792865727 | 447 Count | 536 Count | 447 Count | 4.21 VDC | 0.16 VDC |
| 1792863928 | 441 Count | 530 Count | 441 Count | 4.19 VDC | 0.18 VDC |
| 1792862128 | 439 Count | 528 Count | 439 Count | 4.17 VDC | 0.18 VDC |
| 1792860328 | 437 Count | 526 Count | 437 Count | 4.2 VDC | 0.18 VDC |
| 1792858528 | 435 Count | 524 Count | 435 Count | 4.2 VDC | 0.18 VDC |
| 1792856727 | 433 Count | 522 Count | 433 Count | 4.17 VDC | 0.18 VDC |
| 1792854927 | 431 Count | 520 Count | 431 Count | 4.17 VDC | 0.2 VDC |
| 1792853127 | 429 Count | 518 Count | 429 Count | 4.17 VDC | 0.2 VDC |
| 1792851327 | 427 Count | 516 Count | 427 Count | 4.17 VDC | 0.18 VDC |
| 1792849527 | 425 Count | 514 Count | 425 Count | 4.21 VDC | 0.18 VDC |
| 1792847727 | 423 Count | 512 Count | 423 Count | 4.16 VDC | 0.18 VDC |
| 1792845926 | 421 Count | 510 Count | 421 Count | 4.2 VDC | 0.2 VDC |
| 1792844126 | 419 Count | 508 Count | 419 Count | 4.18 VDC | 0.18 VDC |
| 1792842328 | 413 Count | 502 Count | 413 Count | 4.2 VDC | 0.2 VDC |
| 1792840528 | 412 Count | 501 Count | 412 Count | 4.19 VDC | 0.2 VDC |
| 1792838727 | 410 Count | 499 Count | 410 Count | 4.18 VDC | 0.2 VDC |
| 1792836927 | 408 Count | 497 Count | 408 Count | 4.17 VDC | 0.2 VDC |
| 1792835127 | 406 Count | 495 Count | 406 Count | 4.19 VDC | 0.18 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)