This is the latest recevied telemetry packets stored in our database for station/object ON3RIP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777383025 | 622 Count | 674 Count | 0 Count | 0 VDC | 0 VDC |
| 1777382121 | 602 Count | 674 Count | 0 Count | 0 VDC | 0 VDC |
| 1777381219 | 581 Count | 674 Count | 0 Count | 0 VDC | 0 VDC |
| 1777380313 | 562 Count | 661 Count | 0 Count | 0 VDC | 0 VDC |
| 1777379410 | 542 Count | 646 Count | 0 Count | 0 VDC | 0 VDC |
| 1777378507 | 523 Count | 631 Count | 0 Count | 0 VDC | 0 VDC |
| 1777377604 | 502 Count | 630 Count | 0 Count | 0 VDC | 0 VDC |
| 1777376700 | 483 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1777375797 | 462 Count | 628 Count | 0 Count | 0 VDC | 0 VDC |
| 1777374894 | 442 Count | 627 Count | 0 Count | 0 VDC | 0 VDC |
| 1777373990 | 421 Count | 603 Count | 0 Count | 0 VDC | 0 VDC |
| 1777373087 | 402 Count | 583 Count | 0 Count | 0 VDC | 0 VDC |
| 1777372184 | 382 Count | 566 Count | 0 Count | 0 VDC | 0 VDC |
| 1777371279 | 360 Count | 551 Count | 0 Count | 0 VDC | 0 VDC |
| 1777370376 | 339 Count | 521 Count | 0 Count | 0 VDC | 0 VDC |
| 1777369472 | 319 Count | 489 Count | 0 Count | 0 VDC | 0 VDC |
| 1777368569 | 296 Count | 469 Count | 0 Count | 0 VDC | 0 VDC |
| 1777367750 | 278 Count | 442 Count | 0 Count | 0 VDC | 0 VDC |
| 1777366847 | 256 Count | 412 Count | 0 Count | 0 VDC | 0 VDC |
| 1777365943 | 238 Count | 371 Count | 0 Count | 0 VDC | 0 VDC |
| 1777365040 | 218 Count | 342 Count | 0 Count | 0 VDC | 0 VDC |
| 1777364136 | 198 Count | 311 Count | 0 Count | 0 VDC | 0 VDC |
| 1777363233 | 172 Count | 290 Count | 0 Count | 0 VDC | 0 VDC |
| 1777362330 | 140 Count | 243 Count | 0 Count | 0 VDC | 0 VDC |
| 1777361427 | 119 Count | 193 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)