This is the latest recevied telemetry packets stored in our database for station/object SQ7PKP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788971614 | 553 Count | 996 Count | 79 Count | 0 VDC | 0 VDC |
| 1788971013 | 552 Count | 995 Count | 79 Count | 0 VDC | 0 VDC |
| 1788970413 | 551 Count | 994 Count | 79 Count | 0 VDC | 0 VDC |
| 1788969812 | 550 Count | 993 Count | 79 Count | 0 VDC | 0 VDC |
| 1788969211 | 549 Count | 992 Count | 79 Count | 0 VDC | 0 VDC |
| 1788968610 | 548 Count | 991 Count | 79 Count | 0 VDC | 0 VDC |
| 1788968009 | 547 Count | 990 Count | 79 Count | 0 VDC | 0 VDC |
| 1788967409 | 546 Count | 989 Count | 79 Count | 0 VDC | 0 VDC |
| 1788966808 | 545 Count | 988 Count | 79 Count | 0 VDC | 0 VDC |
| 1788966207 | 544 Count | 988 Count | 79 Count | 0 VDC | 0 VDC |
| 1788965606 | 543 Count | 987 Count | 79 Count | 0 VDC | 0 VDC |
| 1788965005 | 542 Count | 986 Count | 79 Count | 0 VDC | 0 VDC |
| 1788964405 | 541 Count | 985 Count | 79 Count | 0 VDC | 0 VDC |
| 1788963471 | 536 Count | 985 Count | 79 Count | 0 VDC | 0 VDC |
| 1788962871 | 535 Count | 984 Count | 79 Count | 0 VDC | 0 VDC |
| 1788962270 | 534 Count | 983 Count | 79 Count | 0 VDC | 0 VDC |
| 1788961669 | 533 Count | 982 Count | 79 Count | 0 VDC | 0 VDC |
| 1788960467 | 531 Count | 980 Count | 79 Count | 0 VDC | 0 VDC |
| 1788959265 | 529 Count | 978 Count | 79 Count | 0 VDC | 0 VDC |
| 1788958664 | 528 Count | 977 Count | 79 Count | 0 VDC | 0 VDC |
| 1788958064 | 527 Count | 976 Count | 79 Count | 0 VDC | 0 VDC |
| 1788957463 | 526 Count | 975 Count | 79 Count | 0 VDC | 0 VDC |
| 1788956862 | 525 Count | 974 Count | 79 Count | 0 VDC | 0 VDC |
| 1788956261 | 524 Count | 973 Count | 79 Count | 0 VDC | 0 VDC |
| 1788955660 | 523 Count | 967 Count | 79 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)