This is the latest recevied telemetry packets stored in our database for station/object LW2DHT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794850874 | 507 Count | 752 Count | 398 Count | 0 VDC | 0 VDC |
| 1794843699 | 479 Count | 714 Count | 378 Count | 0 VDC | 0 VDC |
| 1794840092 | 470 Count | 702 Count | 371 Count | 0 VDC | 0 VDC |
| 1794836485 | 460 Count | 672 Count | 363 Count | 0 VDC | 0 VDC |
| 1794832880 | 448 Count | 654 Count | 353 Count | 0 VDC | 0 VDC |
| 1794829272 | 436 Count | 640 Count | 343 Count | 0 VDC | 0 VDC |
| 1794822095 | 409 Count | 613 Count | 324 Count | 0 VDC | 0 VDC |
| 1794818489 | 397 Count | 599 Count | 314 Count | 0 VDC | 0 VDC |
| 1794814880 | 385 Count | 581 Count | 304 Count | 0 VDC | 0 VDC |
| 1794811276 | 372 Count | 566 Count | 293 Count | 0 VDC | 0 VDC |
| 1794807670 | 357 Count | 547 Count | 280 Count | 0 VDC | 0 VDC |
| 1794804063 | 345 Count | 530 Count | 270 Count | 0 VDC | 0 VDC |
| 1794800492 | 329 Count | 514 Count | 260 Count | 0 VDC | 0 VDC |
| 1794796885 | 316 Count | 483 Count | 249 Count | 0 VDC | 0 VDC |
| 1794793280 | 302 Count | 463 Count | 237 Count | 0 VDC | 0 VDC |
| 1794789674 | 289 Count | 444 Count | 226 Count | 0 VDC | 0 VDC |
| 1794786067 | 276 Count | 391 Count | 215 Count | 0 VDC | 0 VDC |
| 1794778891 | 251 Count | 331 Count | 198 Count | 0 VDC | 0 VDC |
| 1794775285 | 241 Count | 318 Count | 190 Count | 0 VDC | 0 VDC |
| 1794771678 | 217 Count | 294 Count | 168 Count | 0 VDC | 0 VDC |
| 1794768072 | 204 Count | 281 Count | 157 Count | 0 VDC | 0 VDC |
| 1794764462 | 189 Count | 265 Count | 144 Count | 0 VDC | 0 VDC |
| 1794760857 | 177 Count | 253 Count | 134 Count | 0 VDC | 0 VDC |
| 1794757292 | 163 Count | 243 Count | 126 Count | 0 VDC | 0 VDC |
| 1794753685 | 152 Count | 231 Count | 117 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)