This is the latest recevied telemetry packets stored in our database for station/object XE2OK-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792891910 | 481 Count | 773 Count | 412 Count | 0 VDC | 0 VDC |
| 1792891007 | 476 Count | 766 Count | 408 Count | 0 VDC | 0 VDC |
| 1792890104 | 471 Count | 756 Count | 404 Count | 0 VDC | 0 VDC |
| 1792889201 | 466 Count | 741 Count | 400 Count | 0 VDC | 0 VDC |
| 1792888298 | 461 Count | 733 Count | 396 Count | 0 VDC | 0 VDC |
| 1792887395 | 456 Count | 721 Count | 392 Count | 0 VDC | 0 VDC |
| 1792886492 | 451 Count | 717 Count | 388 Count | 0 VDC | 0 VDC |
| 1792885588 | 446 Count | 711 Count | 384 Count | 0 VDC | 0 VDC |
| 1792884685 | 441 Count | 704 Count | 380 Count | 0 VDC | 0 VDC |
| 1792883783 | 428 Count | 688 Count | 368 Count | 0 VDC | 0 VDC |
| 1792882879 | 418 Count | 677 Count | 359 Count | 0 VDC | 0 VDC |
| 1792881976 | 401 Count | 659 Count | 343 Count | 0 VDC | 0 VDC |
| 1792881073 | 396 Count | 653 Count | 339 Count | 0 VDC | 0 VDC |
| 1792880174 | 391 Count | 643 Count | 335 Count | 0 VDC | 0 VDC |
| 1792879263 | 384 Count | 629 Count | 329 Count | 0 VDC | 0 VDC |
| 1792878360 | 375 Count | 605 Count | 321 Count | 0 VDC | 0 VDC |
| 1792877457 | 370 Count | 599 Count | 317 Count | 0 VDC | 0 VDC |
| 1792876554 | 366 Count | 592 Count | 314 Count | 0 VDC | 0 VDC |
| 1792875651 | 361 Count | 585 Count | 310 Count | 0 VDC | 0 VDC |
| 1792874751 | 356 Count | 576 Count | 306 Count | 0 VDC | 0 VDC |
| 1792873915 | 348 Count | 569 Count | 303 Count | 0 VDC | 0 VDC |
| 1792873012 | 343 Count | 557 Count | 299 Count | 0 VDC | 0 VDC |
| 1792872109 | 329 Count | 539 Count | 286 Count | 0 VDC | 0 VDC |
| 1792871206 | 312 Count | 517 Count | 270 Count | 0 VDC | 0 VDC |
| 1792870303 | 299 Count | 501 Count | 258 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)