This is the latest recevied telemetry packets stored in our database for station/object KK7LLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1773418115 | 453 Volts | 608 Deg.F | 343 | 0 | 0 |
| 1773418095 | 455 Volts | 608 Deg.F | 350 | 0 | 0 |
| 1773418075 | 449 Volts | 608 Deg.F | 586 | 0 | 0 |
| 1773417785 | 462 Volts | 604 Deg.F | 341 | 0 | 0 |
| 1773417731 | 448 Volts | 604 Deg.F | 594 | 0 | 0 |
| 1773417256 | 464 Volts | 608 Deg.F | 322 | 0 | 0 |
| 1773417241 | 468 Volts | 607 Deg.F | 331 | 0 | 0 |
| 1773417105 | 450 Volts | 604 Deg.F | 357 | 0 | 0 |
| 1773416794 | 461 Volts | 601 Deg.F | 326 | 0 | 0 |
| 1773416741 | 466 Volts | 600 Deg.F | 557 | 0 | 0 |
| 1773416713 | 456 Volts | 597 Deg.F | 356 | 0 | 0 |
| 1773416699 | 461 Volts | 597 Deg.F | 362 | 0 | 0 |
| 1773416680 | 442 Volts | 597 Deg.F | 725 | 0 | 0 |
| 1773415738 | 471 Volts | 604 Deg.F | 325 | 0 | 0 |
| 1773415651 | 474 Volts | 600 Deg.F | 328 | 0 | 0 |
| 1773415566 | 474 Volts | 599 Deg.F | 335 | 0 | 0 |
| 1773415436 | 473 Volts | 598 Deg.F | 339 | 0 | 0 |
| 1773415329 | 473 Volts | 595 Deg.F | 331 | 0 | 0 |
| 1773415312 | 476 Volts | 596 Deg.F | 761 | 0 | 0 |
| 1773415178 | 473 Volts | 590 Deg.F | 348 | 0 | 0 |
| 1773414999 | 474 Volts | 585 Deg.F | 340 | 0 | 0 |
| 1773414956 | 468 Volts | 584 Deg.F | 346 | 0 | 0 |
| 1773414930 | 468 Volts | 583 Deg.F | 347 | 0 | 0 |
| 1773414886 | 465 Volts | 582 Deg.F | 359 | 0 | 0 |
| 1773414696 | 471 Volts | 578 Deg.F | 605 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)