This is the latest recevied telemetry packets stored in our database for station/object YC2SNK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777400134 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1777398386 | 5 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1777396582 | 4 Count | 724 Count | 0 Count | 0 VDC | 0 VDC |
| 1777394779 | 3 Count | 578 Count | 0 Count | 0 VDC | 0 VDC |
| 1777392975 | 2 Count | 434 Count | 0 Count | 0 VDC | 0 VDC |
| 1777391171 | 1 Count | 289 Count | 0 Count | 0 VDC | 0 VDC |
| 1777389367 | 0 Count | 146 Count | 0 Count | 0 VDC | 0 VDC |
| 1777387563 | 7 Count | 1107 Count | 0 Count | 0 VDC | 0 VDC |
| 1777385759 | 6 Count | 965 Count | 0 Count | 0 VDC | 0 VDC |
| 1777383955 | 5 Count | 822 Count | 0 Count | 0 VDC | 0 VDC |
| 1777382151 | 4 Count | 683 Count | 0 Count | 0 VDC | 0 VDC |
| 1777380347 | 3 Count | 536 Count | 0 Count | 0 VDC | 0 VDC |
| 1777378547 | 2 Count | 394 Count | 0 Count | 0 VDC | 0 VDC |
| 1777374973 | 0 Count | 132 Count | 0 Count | 0 VDC | 0 VDC |
| 1777373170 | 88 Count | 1048 Count | 0 Count | 0 VDC | 0 VDC |
| 1777371366 | 87 Count | 900 Count | 0 Count | 0 VDC | 0 VDC |
| 1777369562 | 86 Count | 832 Count | 0 Count | 0 VDC | 0 VDC |
| 1777367758 | 85 Count | 821 Count | 0 Count | 0 VDC | 0 VDC |
| 1777365954 | 84 Count | 814 Count | 0 Count | 0 VDC | 0 VDC |
| 1777364150 | 83 Count | 804 Count | 0 Count | 0 VDC | 0 VDC |
| 1777362346 | 82 Count | 797 Count | 0 Count | 0 VDC | 0 VDC |
| 1777360542 | 81 Count | 788 Count | 0 Count | 0 VDC | 0 VDC |
| 1777358738 | 80 Count | 773 Count | 0 Count | 0 VDC | 0 VDC |
| 1777356934 | 79 Count | 763 Count | 0 Count | 0 VDC | 0 VDC |
| 1777355175 | 78 Count | 755 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)