This is the latest recevied telemetry packets stored in our database for station/object SP6ICO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1784119407 | 717 Count | 580 Count | 528 Count | 0 VDC | 0 VDC |
| 1784117606 | 714 Count | 578 Count | 526 Count | 0 VDC | 0 VDC |
| 1784115805 | 711 Count | 576 Count | 524 Count | 0 VDC | 0 VDC |
| 1784114005 | 708 Count | 574 Count | 522 Count | 0 VDC | 0 VDC |
| 1784112204 | 705 Count | 572 Count | 520 Count | 0 VDC | 0 VDC |
| 1784110403 | 702 Count | 570 Count | 518 Count | 0 VDC | 0 VDC |
| 1784108603 | 699 Count | 568 Count | 516 Count | 0 VDC | 0 VDC |
| 1784106802 | 696 Count | 566 Count | 514 Count | 0 VDC | 0 VDC |
| 1784105001 | 693 Count | 564 Count | 512 Count | 0 VDC | 0 VDC |
| 1784103201 | 690 Count | 562 Count | 510 Count | 0 VDC | 0 VDC |
| 1784101407 | 687 Count | 560 Count | 508 Count | 0 VDC | 0 VDC |
| 1784099606 | 684 Count | 558 Count | 506 Count | 0 VDC | 0 VDC |
| 1784097805 | 681 Count | 556 Count | 504 Count | 0 VDC | 0 VDC |
| 1784096005 | 678 Count | 554 Count | 502 Count | 0 VDC | 0 VDC |
| 1784094204 | 675 Count | 552 Count | 500 Count | 0 VDC | 0 VDC |
| 1784092403 | 672 Count | 550 Count | 498 Count | 0 VDC | 0 VDC |
| 1784090603 | 669 Count | 548 Count | 496 Count | 0 VDC | 0 VDC |
| 1784088802 | 666 Count | 546 Count | 494 Count | 0 VDC | 0 VDC |
| 1784087001 | 663 Count | 544 Count | 492 Count | 0 VDC | 0 VDC |
| 1784085201 | 660 Count | 542 Count | 490 Count | 0 VDC | 0 VDC |
| 1784083400 | 657 Count | 540 Count | 488 Count | 0 VDC | 0 VDC |
| 1784081599 | 654 Count | 538 Count | 486 Count | 0 VDC | 0 VDC |
| 1784079808 | 651 Count | 536 Count | 484 Count | 0 VDC | 0 VDC |
| 1784078007 | 648 Count | 534 Count | 482 Count | 0 VDC | 0 VDC |
| 1784076207 | 645 Count | 532 Count | 480 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)