This is the latest recevied telemetry packets stored in our database for station/object F5ZMX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785341018 | 247 Count | 642 Count | 198 Count | 0 VDC | 0 VDC |
| 1785340115 | 244 Count | 636 Count | 196 Count | 0 VDC | 0 VDC |
| 1785339212 | 240 Count | 630 Count | 193 Count | 0 VDC | 0 VDC |
| 1785338308 | 237 Count | 624 Count | 191 Count | 0 VDC | 0 VDC |
| 1785337487 | 233 Count | 618 Count | 188 Count | 0 VDC | 0 VDC |
| 1785336584 | 226 Count | 603 Count | 182 Count | 0 VDC | 0 VDC |
| 1785335680 | 212 Count | 571 Count | 169 Count | 0 VDC | 0 VDC |
| 1785334777 | 205 Count | 560 Count | 163 Count | 0 VDC | 0 VDC |
| 1785333874 | 202 Count | 552 Count | 161 Count | 0 VDC | 0 VDC |
| 1785332970 | 198 Count | 546 Count | 158 Count | 0 VDC | 0 VDC |
| 1785332067 | 195 Count | 541 Count | 156 Count | 0 VDC | 0 VDC |
| 1785331164 | 191 Count | 532 Count | 153 Count | 0 VDC | 0 VDC |
| 1785330260 | 187 Count | 526 Count | 150 Count | 0 VDC | 0 VDC |
| 1785329357 | 183 Count | 519 Count | 147 Count | 0 VDC | 0 VDC |
| 1785328454 | 180 Count | 513 Count | 145 Count | 0 VDC | 0 VDC |
| 1785327550 | 176 Count | 507 Count | 142 Count | 0 VDC | 0 VDC |
| 1785326647 | 172 Count | 498 Count | 139 Count | 0 VDC | 0 VDC |
| 1785325743 | 169 Count | 487 Count | 137 Count | 0 VDC | 0 VDC |
| 1785324839 | 165 Count | 481 Count | 134 Count | 0 VDC | 0 VDC |
| 1785323936 | 161 Count | 474 Count | 131 Count | 0 VDC | 0 VDC |
| 1785323032 | 157 Count | 465 Count | 128 Count | 0 VDC | 0 VDC |
| 1785322129 | 152 Count | 455 Count | 124 Count | 0 VDC | 0 VDC |
| 1785321226 | 148 Count | 448 Count | 121 Count | 0 VDC | 0 VDC |
| 1785320322 | 144 Count | 439 Count | 118 Count | 0 VDC | 0 VDC |
| 1785319418 | 140 Count | 425 Count | 115 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)