This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754404260 | 4 Count | 191 Count | 2 Count | 4.22 VDC | 0.14 VDC |
| 1754402456 | 2 Count | 118 Count | 1 Count | 4.15 VDC | 0.14 VDC |
| 1754400653 | 0 Count | 50 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1754398850 | 32 Count | 1047 Count | 14 Count | 4.12 VDC | 0.14 VDC |
| 1754397048 | 30 Count | 970 Count | 13 Count | 4.15 VDC | 0.14 VDC |
| 1754395245 | 28 Count | 859 Count | 12 Count | 4.17 VDC | 0.14 VDC |
| 1754393442 | 26 Count | 794 Count | 11 Count | 4.2 VDC | 0.14 VDC |
| 1754391639 | 24 Count | 739 Count | 10 Count | 4.17 VDC | 0.14 VDC |
| 1754389836 | 22 Count | 646 Count | 9 Count | 4.2 VDC | 0.14 VDC |
| 1754388034 | 20 Count | 602 Count | 8 Count | 4.18 VDC | 0.14 VDC |
| 1754386231 | 18 Count | 555 Count | 7 Count | 4.22 VDC | 0.14 VDC |
| 1754384461 | 12 Count | 500 Count | 6 Count | 4.13 VDC | 0.14 VDC |
| 1754380855 | 8 Count | 378 Count | 4 Count | 4.16 VDC | 0.14 VDC |
| 1754379052 | 6 Count | 321 Count | 3 Count | 4.23 VDC | 0.14 VDC |
| 1754377250 | 5 Count | 254 Count | 3 Count | 4.12 VDC | 0.14 VDC |
| 1754375447 | 3 Count | 188 Count | 2 Count | 4.2 VDC | 0.14 VDC |
| 1754373644 | 1 Count | 84 Count | 1 Count | 4.23 VDC | 0.14 VDC |
| 1754371841 | 47 Count | 1118 Count | 20 Count | 4.2 VDC | 0.14 VDC |
| 1754370038 | 45 Count | 1000 Count | 19 Count | 4.2 VDC | 0.14 VDC |
| 1754368235 | 43 Count | 939 Count | 18 Count | 4.14 VDC | 0.14 VDC |
| 1754366432 | 41 Count | 888 Count | 17 Count | 4.15 VDC | 0.14 VDC |
| 1754364630 | 39 Count | 841 Count | 16 Count | 4.24 VDC | 0.14 VDC |
| 1754362859 | 33 Count | 779 Count | 15 Count | 4.23 VDC | 0.14 VDC |
| 1754357451 | 27 Count | 640 Count | 12 Count | 4.2 VDC | 0.14 VDC |
| 1754355648 | 25 Count | 591 Count | 11 Count | 4.19 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)