This is the latest recevied telemetry packets stored in our database for station/object EA4IAX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781409912 | 312 Count | 680 Count | 0 Count | 0 VDC | 0 VDC |
| 1781406309 | 308 Count | 675 Count | 0 Count | 0 VDC | 0 VDC |
| 1781402707 | 299 Count | 668 Count | 0 Count | 0 VDC | 0 VDC |
| 1781399104 | 294 Count | 662 Count | 0 Count | 0 VDC | 0 VDC |
| 1781395501 | 289 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1781391928 | 285 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1781388328 | 280 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1781384728 | 276 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1781381125 | 271 Count | 650 Count | 0 Count | 0 VDC | 0 VDC |
| 1781377522 | 267 Count | 642 Count | 0 Count | 0 VDC | 0 VDC |
| 1781373919 | 262 Count | 634 Count | 0 Count | 0 VDC | 0 VDC |
| 1781370315 | 257 Count | 628 Count | 0 Count | 0 VDC | 0 VDC |
| 1781366712 | 252 Count | 621 Count | 0 Count | 0 VDC | 0 VDC |
| 1781363109 | 247 Count | 612 Count | 0 Count | 0 VDC | 0 VDC |
| 1781359507 | 242 Count | 603 Count | 0 Count | 0 VDC | 0 VDC |
| 1781355904 | 237 Count | 588 Count | 0 Count | 0 VDC | 0 VDC |
| 1781352301 | 227 Count | 574 Count | 0 Count | 0 VDC | 0 VDC |
| 1781348734 | 195 Count | 574 Count | 0 Count | 0 VDC | 0 VDC |
| 1781345131 | 190 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
| 1781341528 | 185 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1781337925 | 179 Count | 557 Count | 0 Count | 0 VDC | 0 VDC |
| 1781334322 | 174 Count | 551 Count | 0 Count | 0 VDC | 0 VDC |
| 1781330719 | 169 Count | 544 Count | 0 Count | 0 VDC | 0 VDC |
| 1781327116 | 164 Count | 537 Count | 0 Count | 0 VDC | 0 VDC |
| 1781323513 | 159 Count | 531 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)