This is the latest recevied telemetry packets stored in our database for station/object HB9IMG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773446695 | 356 Count | 596 Count | 0 Count | 0 VDC | 0 VDC |
| 1773444891 | 355 Count | 591 Count | 0 Count | 0 VDC | 0 VDC |
| 1773443088 | 354 Count | 585 Count | 0 Count | 0 VDC | 0 VDC |
| 1773441285 | 353 Count | 580 Count | 0 Count | 0 VDC | 0 VDC |
| 1773439482 | 352 Count | 576 Count | 0 Count | 0 VDC | 0 VDC |
| 1773437679 | 351 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1773435875 | 350 Count | 563 Count | 0 Count | 0 VDC | 0 VDC |
| 1773434072 | 349 Count | 547 Count | 0 Count | 0 VDC | 0 VDC |
| 1773432269 | 348 Count | 539 Count | 0 Count | 0 VDC | 0 VDC |
| 1773430466 | 347 Count | 534 Count | 0 Count | 0 VDC | 0 VDC |
| 1773426895 | 341 Count | 522 Count | 0 Count | 0 VDC | 0 VDC |
| 1773425092 | 340 Count | 514 Count | 0 Count | 0 VDC | 0 VDC |
| 1773423289 | 339 Count | 504 Count | 0 Count | 0 VDC | 0 VDC |
| 1773421485 | 338 Count | 492 Count | 0 Count | 0 VDC | 0 VDC |
| 1773419682 | 337 Count | 478 Count | 0 Count | 0 VDC | 0 VDC |
| 1773417879 | 336 Count | 467 Count | 0 Count | 0 VDC | 0 VDC |
| 1773416076 | 335 Count | 453 Count | 0 Count | 0 VDC | 0 VDC |
| 1773414272 | 334 Count | 443 Count | 0 Count | 0 VDC | 0 VDC |
| 1773412469 | 333 Count | 434 Count | 0 Count | 0 VDC | 0 VDC |
| 1773408863 | 331 Count | 426 Count | 0 Count | 0 VDC | 0 VDC |
| 1773407282 | 26 Count | 13 Count | 0 Count | 0 VDC | 0 VDC |
| 1773405292 | 325 Count | 408 Count | 0 Count | 0 VDC | 0 VDC |
| 1773403489 | 324 Count | 403 Count | 0 Count | 0 VDC | 0 VDC |
| 1773401686 | 323 Count | 397 Count | 0 Count | 0 VDC | 0 VDC |
| 1773399882 | 322 Count | 390 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)