This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774456776 | 0 Count | 378 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774453176 | 0 Count | 339 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774449576 | 0 Count | 325 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774445975 | 0 Count | 304 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774442375 | 0 Count | 290 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774438775 | 0 Count | 273 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774435176 | 0 Count | 259 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774431576 | 0 Count | 243 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774427976 | 0 Count | 229 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774424376 | 0 Count | 186 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774420776 | 0 Count | 157 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774417175 | 0 Count | 145 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774413575 | 0 Count | 132 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774409975 | 0 Count | 119 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774406375 | 0 Count | 105 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774402775 | 0 Count | 85 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774399175 | 0 Count | 70 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774395575 | 0 Count | 57 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774391975 | 0 Count | 44 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1774388374 | 0 Count | 26 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774384774 | 0 Count | 16 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774381174 | 0 Count | 1008 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1774377574 | 0 Count | 993 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774373974 | 0 Count | 979 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774370374 | 0 Count | 967 Count | 0 Count | 3.92 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)