This is the latest recevied telemetry packets stored in our database for station/object PE1PMD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785388925 | 236 Count | 504 Count | 115 Count | 0 VDC | 0 VDC |
| 1785388022 | 225 Count | 479 Count | 111 Count | 0 VDC | 0 VDC |
| 1785387118 | 197 Count | 443 Count | 91 Count | 0 VDC | 0 VDC |
| 1785386214 | 154 Count | 397 Count | 55 Count | 0 VDC | 0 VDC |
| 1785385311 | 130 Count | 370 Count | 40 Count | 0 VDC | 0 VDC |
| 1785384407 | 119 Count | 349 Count | 37 Count | 0 VDC | 0 VDC |
| 1785383503 | 106 Count | 332 Count | 34 Count | 0 VDC | 0 VDC |
| 1785382600 | 101 Count | 318 Count | 32 Count | 0 VDC | 0 VDC |
| 1785381696 | 88 Count | 299 Count | 28 Count | 0 VDC | 0 VDC |
| 1785380792 | 79 Count | 278 Count | 25 Count | 0 VDC | 0 VDC |
| 1785379888 | 71 Count | 254 Count | 25 Count | 0 VDC | 0 VDC |
| 1785378984 | 69 Count | 219 Count | 24 Count | 0 VDC | 0 VDC |
| 1785378081 | 65 Count | 187 Count | 21 Count | 0 VDC | 0 VDC |
| 1785377177 | 61 Count | 166 Count | 19 Count | 0 VDC | 0 VDC |
| 1785376365 | 50 Count | 139 Count | 15 Count | 0 VDC | 0 VDC |
| 1785375461 | 44 Count | 119 Count | 13 Count | 0 VDC | 0 VDC |
| 1785374556 | 33 Count | 98 Count | 10 Count | 0 VDC | 0 VDC |
| 1785373652 | 22 Count | 75 Count | 6 Count | 0 VDC | 0 VDC |
| 1785372749 | 13 Count | 54 Count | 4 Count | 0 VDC | 0 VDC |
| 1785371844 | 6 Count | 24 Count | 1 Count | 0 VDC | 0 VDC |
| 1785370940 | 388 Count | 1010 Count | 307 Count | 0 VDC | 0 VDC |
| 1785370037 | 379 Count | 982 Count | 304 Count | 0 VDC | 0 VDC |
| 1785369133 | 370 Count | 957 Count | 303 Count | 0 VDC | 0 VDC |
| 1785368230 | 363 Count | 933 Count | 298 Count | 0 VDC | 0 VDC |
| 1785367326 | 357 Count | 910 Count | 293 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)