This is the latest recevied telemetry packets stored in our database for station/object F4GMT-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793616909 | 153 Count | 325 Count | 0 Count | 0 VDC | 0 VDC |
| 1793616008 | 152 Count | 322 Count | 0 Count | 0 VDC | 0 VDC |
| 1793615107 | 151 Count | 320 Count | 0 Count | 0 VDC | 0 VDC |
| 1793614206 | 150 Count | 317 Count | 0 Count | 0 VDC | 0 VDC |
| 1793613324 | 145 Count | 315 Count | 0 Count | 0 VDC | 0 VDC |
| 1793612423 | 144 Count | 312 Count | 0 Count | 0 VDC | 0 VDC |
| 1793611522 | 143 Count | 310 Count | 0 Count | 0 VDC | 0 VDC |
| 1793610621 | 142 Count | 307 Count | 0 Count | 0 VDC | 0 VDC |
| 1793609721 | 141 Count | 305 Count | 0 Count | 0 VDC | 0 VDC |
| 1793608820 | 140 Count | 302 Count | 0 Count | 0 VDC | 0 VDC |
| 1793607919 | 139 Count | 300 Count | 0 Count | 0 VDC | 0 VDC |
| 1793607018 | 138 Count | 297 Count | 0 Count | 0 VDC | 0 VDC |
| 1793606117 | 137 Count | 295 Count | 0 Count | 0 VDC | 0 VDC |
| 1793605216 | 136 Count | 292 Count | 0 Count | 0 VDC | 0 VDC |
| 1793604315 | 135 Count | 290 Count | 0 Count | 0 VDC | 0 VDC |
| 1793603414 | 134 Count | 287 Count | 0 Count | 0 VDC | 0 VDC |
| 1793602514 | 133 Count | 285 Count | 0 Count | 0 VDC | 0 VDC |
| 1793601613 | 132 Count | 282 Count | 0 Count | 0 VDC | 0 VDC |
| 1793600712 | 131 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1793599811 | 130 Count | 277 Count | 0 Count | 0 VDC | 0 VDC |
| 1793598911 | 129 Count | 275 Count | 0 Count | 0 VDC | 0 VDC |
| 1793598010 | 128 Count | 272 Count | 0 Count | 0 VDC | 0 VDC |
| 1793597109 | 127 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
| 1793596208 | 126 Count | 267 Count | 0 Count | 0 VDC | 0 VDC |
| 1793595307 | 125 Count | 265 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)