This is the latest recevied telemetry packets stored in our database for station/object SQ9PL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785373542 | 5 Count | 20 Count | 5 Count | 0 VDC | 0 VDC |
| 1785371741 | 242 Count | 1021 Count | 186 Count | 0 VDC | 0 VDC |
| 1785369940 | 237 Count | 999 Count | 182 Count | 0 VDC | 0 VDC |
| 1785368140 | 232 Count | 983 Count | 178 Count | 0 VDC | 0 VDC |
| 1785366339 | 228 Count | 959 Count | 175 Count | 0 VDC | 0 VDC |
| 1785364538 | 225 Count | 938 Count | 173 Count | 0 VDC | 0 VDC |
| 1785362737 | 221 Count | 916 Count | 170 Count | 0 VDC | 0 VDC |
| 1785360937 | 217 Count | 895 Count | 167 Count | 0 VDC | 0 VDC |
| 1785359136 | 212 Count | 868 Count | 163 Count | 0 VDC | 0 VDC |
| 1785357335 | 202 Count | 827 Count | 154 Count | 0 VDC | 0 VDC |
| 1785355542 | 187 Count | 788 Count | 149 Count | 0 VDC | 0 VDC |
| 1785353741 | 183 Count | 765 Count | 146 Count | 0 VDC | 0 VDC |
| 1785351941 | 180 Count | 752 Count | 144 Count | 0 VDC | 0 VDC |
| 1785350140 | 175 Count | 730 Count | 140 Count | 0 VDC | 0 VDC |
| 1785348339 | 166 Count | 693 Count | 132 Count | 0 VDC | 0 VDC |
| 1785346538 | 149 Count | 659 Count | 116 Count | 0 VDC | 0 VDC |
| 1785344738 | 123 Count | 616 Count | 91 Count | 0 VDC | 0 VDC |
| 1785342937 | 116 Count | 583 Count | 85 Count | 0 VDC | 0 VDC |
| 1785341136 | 111 Count | 547 Count | 81 Count | 0 VDC | 0 VDC |
| 1785339336 | 101 Count | 520 Count | 72 Count | 0 VDC | 0 VDC |
| 1785337535 | 99 Count | 501 Count | 71 Count | 0 VDC | 0 VDC |
| 1785335734 | 92 Count | 473 Count | 65 Count | 0 VDC | 0 VDC |
| 1785333941 | 83 Count | 462 Count | 63 Count | 0 VDC | 0 VDC |
| 1785332141 | 80 Count | 441 Count | 61 Count | 0 VDC | 0 VDC |
| 1785330340 | 77 Count | 422 Count | 59 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)