This is the latest recevied telemetry packets stored in our database for station/object IW2HTZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768843469 | 8 | 0 | 193 | 0 | 0 |
| 1768842265 | 21 | 0 | 195 | 0 | 0 |
| 1768841061 | 9 | 0 | 196 | 0 | 0 |
| 1768839857 | 6 | 0 | 201 | 0 | 0 |
| 1768838653 | 14 | 0 | 199 | 0 | 0 |
| 1768837448 | 9 | 0 | 202 | 0 | 0 |
| 1768836244 | 8 | 0 | 199 | 0 | 0 |
| 1768835040 | 12 | 0 | 198 | 0 | 0 |
| 1768833836 | 7 | 0 | 210 | 0 | 0 |
| 1768832632 | 16 | 0 | 194 | 0 | 0 |
| 1768831428 | 15 | 0 | 197 | 0 | 0 |
| 1768830223 | 10 | 0 | 202 | 0 | 0 |
| 1768829019 | 15 | 0 | 206 | 0 | 0 |
| 1768827815 | 14 | 0 | 194 | 0 | 0 |
| 1768826610 | 12 | 0 | 212 | 0 | 0 |
| 1768825406 | 6 | 0 | 198 | 0 | 0 |
| 1768824202 | 13 | 0 | 196 | 0 | 0 |
| 1768822998 | 18 | 0 | 204 | 0 | 0 |
| 1768821794 | 10 | 0 | 194 | 0 | 0 |
| 1768820590 | 13 | 0 | 198 | 0 | 0 |
| 1768819386 | 5 | 0 | 203 | 0 | 0 |
| 1768818181 | 11 | 0 | 201 | 0 | 0 |
| 1768816977 | 14 | 0 | 200 | 0 | 0 |
| 1768815773 | 7 | 0 | 198 | 0 | 0 |
| 1768814569 | 7 | 0 | 196 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)