This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783267803 | 172 Count | 602 Count | 0 Count | 0 VDC | 0 VDC |
| 1783266002 | 168 Count | 597 Count | 0 Count | 0 VDC | 0 VDC |
| 1783264201 | 164 Count | 582 Count | 0 Count | 0 VDC | 0 VDC |
| 1783262401 | 160 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1783260609 | 156 Count | 550 Count | 0 Count | 0 VDC | 0 VDC |
| 1783258808 | 152 Count | 537 Count | 0 Count | 0 VDC | 0 VDC |
| 1783257007 | 148 Count | 527 Count | 0 Count | 0 VDC | 0 VDC |
| 1783255206 | 144 Count | 516 Count | 0 Count | 0 VDC | 0 VDC |
| 1783253405 | 140 Count | 507 Count | 0 Count | 0 VDC | 0 VDC |
| 1783251605 | 136 Count | 498 Count | 0 Count | 0 VDC | 0 VDC |
| 1783249804 | 132 Count | 486 Count | 0 Count | 0 VDC | 0 VDC |
| 1783248003 | 128 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1783246203 | 124 Count | 398 Count | 0 Count | 0 VDC | 0 VDC |
| 1783244402 | 120 Count | 393 Count | 0 Count | 0 VDC | 0 VDC |
| 1783242601 | 116 Count | 388 Count | 0 Count | 0 VDC | 0 VDC |
| 1783240800 | 112 Count | 383 Count | 0 Count | 0 VDC | 0 VDC |
| 1783239008 | 108 Count | 378 Count | 0 Count | 0 VDC | 0 VDC |
| 1783237207 | 104 Count | 373 Count | 0 Count | 0 VDC | 0 VDC |
| 1783235406 | 100 Count | 368 Count | 0 Count | 0 VDC | 0 VDC |
| 1783233605 | 96 Count | 363 Count | 0 Count | 0 VDC | 0 VDC |
| 1783231805 | 93 Count | 359 Count | 0 Count | 0 VDC | 0 VDC |
| 1783230004 | 89 Count | 354 Count | 0 Count | 0 VDC | 0 VDC |
| 1783228203 | 85 Count | 349 Count | 0 Count | 0 VDC | 0 VDC |
| 1783226402 | 81 Count | 344 Count | 0 Count | 0 VDC | 0 VDC |
| 1783224602 | 77 Count | 339 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)