This is the latest recevied telemetry packets stored in our database for station/object SK3VJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774440321 | 35 Count | 94 Count | 28 Count | 0 VDC | 0 VDC |
| 1774438518 | 27 Count | 70 Count | 21 Count | 0 VDC | 0 VDC |
| 1774436715 | 19 Count | 51 Count | 14 Count | 0 VDC | 0 VDC |
| 1774434946 | 8 Count | 28 Count | 8 Count | 0 VDC | 0 VDC |
| 1774433143 | 299 Count | 1002 Count | 260 Count | 0 VDC | 0 VDC |
| 1774431340 | 292 Count | 974 Count | 254 Count | 0 VDC | 0 VDC |
| 1774429537 | 284 Count | 947 Count | 247 Count | 0 VDC | 0 VDC |
| 1774427734 | 277 Count | 920 Count | 241 Count | 0 VDC | 0 VDC |
| 1774425930 | 270 Count | 892 Count | 235 Count | 0 VDC | 0 VDC |
| 1774424128 | 260 Count | 850 Count | 226 Count | 0 VDC | 0 VDC |
| 1774422324 | 252 Count | 812 Count | 219 Count | 0 VDC | 0 VDC |
| 1774420521 | 245 Count | 787 Count | 213 Count | 0 VDC | 0 VDC |
| 1774418718 | 237 Count | 767 Count | 206 Count | 0 VDC | 0 VDC |
| 1774416915 | 226 Count | 734 Count | 196 Count | 0 VDC | 0 VDC |
| 1774415112 | 215 Count | 683 Count | 186 Count | 0 VDC | 0 VDC |
| 1774413343 | 201 Count | 636 Count | 177 Count | 0 VDC | 0 VDC |
| 1774411540 | 188 Count | 600 Count | 165 Count | 0 VDC | 0 VDC |
| 1774409737 | 178 Count | 564 Count | 156 Count | 0 VDC | 0 VDC |
| 1774407934 | 167 Count | 531 Count | 146 Count | 0 VDC | 0 VDC |
| 1774406131 | 156 Count | 499 Count | 136 Count | 0 VDC | 0 VDC |
| 1774404328 | 145 Count | 470 Count | 126 Count | 0 VDC | 0 VDC |
| 1774402525 | 135 Count | 437 Count | 117 Count | 0 VDC | 0 VDC |
| 1774400722 | 124 Count | 402 Count | 107 Count | 0 VDC | 0 VDC |
| 1774398919 | 115 Count | 375 Count | 99 Count | 0 VDC | 0 VDC |
| 1774397116 | 105 Count | 346 Count | 90 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)