This is the latest recevied telemetry packets stored in our database for station/object UB0JBX-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | OnlineCnt* | NodesCnt* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 05/25/2025 8:57:34 AM+00:00 | 6 | 55 | 0 | 0 | 0 |
| 05/25/2025 8:47:04 AM+00:00 | 5 | 55 | 0 | 0 | 0 |
| 05/25/2025 8:36:33 AM+00:00 | 6 | 55 | 0 | 0 | 0 |
| 05/25/2025 8:26:03 AM+00:00 | 8 | 55 | 0 | 0 | 0 |
| 05/25/2025 8:15:32 AM+00:00 | 8 | 55 | 0 | 0 | 0 |
| 05/25/2025 8:05:02 AM+00:00 | 7 | 55 | 0 | 0 | 0 |
| 05/25/2025 7:54:31 AM+00:00 | 7 | 55 | 0 | 0 | 0 |
| 05/25/2025 7:44:01 AM+00:00 | 7 | 55 | 0 | 0 | 0 |
| 05/25/2025 7:33:30 AM+00:00 | 7 | 55 | 0 | 0 | 0 |
| 05/25/2025 7:23:00 AM+00:00 | 6 | 55 | 0 | 0 | 0 |
| 05/25/2025 7:12:29 AM+00:00 | 6 | 55 | 0 | 0 | 0 |
| 05/25/2025 7:01:59 AM+00:00 | 5 | 55 | 0 | 0 | 0 |
| 05/25/2025 6:51:28 AM+00:00 | 5 | 55 | 0 | 0 | 0 |
| 05/25/2025 6:40:58 AM+00:00 | 4 | 55 | 0 | 0 | 0 |
| 05/25/2025 6:30:27 AM+00:00 | 4 | 55 | 0 | 0 | 0 |
| 05/25/2025 6:19:57 AM+00:00 | 3 | 55 | 0 | 0 | 0 |
| 05/25/2025 6:09:27 AM+00:00 | 3 | 55 | 0 | 0 | 0 |
| 05/25/2025 5:58:57 AM+00:00 | 4 | 55 | 0 | 0 | 0 |
| 05/25/2025 5:48:27 AM+00:00 | 5 | 55 | 0 | 0 | 0 |
| 05/25/2025 5:37:57 AM+00:00 | 6 | 55 | 0 | 0 | 0 |
| 05/25/2025 5:27:26 AM+00:00 | 8 | 55 | 0 | 0 | 0 |
| 05/25/2025 5:16:56 AM+00:00 | 8 | 55 | 0 | 0 | 0 |
| 05/25/2025 5:06:26 AM+00:00 | 8 | 55 | 0 | 0 | 0 |
| 05/25/2025 4:55:56 AM+00:00 | 8 | 55 | 0 | 0 | 0 |
| 05/25/2025 4:45:25 AM+00:00 | 8 | 55 | 0 | 0 | 0 |
*Used Equation Coefficients:
OnlineCnt: 0, 1, 0
NodesCnt: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)