This is the latest recevied telemetry packets stored in our database for station/object F5MIW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773436919 | 696 Count | 901 Count | 633 Count | 0 VDC | 0 VDC |
| 1773436015 | 686 Count | 891 Count | 624 Count | 0 VDC | 0 VDC |
| 1773435216 | 677 Count | 883 Count | 616 Count | 0 VDC | 0 VDC |
| 1773434311 | 669 Count | 873 Count | 609 Count | 0 VDC | 0 VDC |
| 1773433407 | 655 Count | 859 Count | 596 Count | 0 VDC | 0 VDC |
| 1773432503 | 644 Count | 842 Count | 586 Count | 0 VDC | 0 VDC |
| 1773431598 | 597 Count | 784 Count | 540 Count | 0 VDC | 0 VDC |
| 1773430694 | 583 Count | 755 Count | 527 Count | 0 VDC | 0 VDC |
| 1773429788 | 568 Count | 739 Count | 513 Count | 0 VDC | 0 VDC |
| 1773428884 | 560 Count | 728 Count | 506 Count | 0 VDC | 0 VDC |
| 1773427980 | 550 Count | 716 Count | 497 Count | 0 VDC | 0 VDC |
| 1773427076 | 544 Count | 703 Count | 492 Count | 0 VDC | 0 VDC |
| 1773426171 | 534 Count | 690 Count | 483 Count | 0 VDC | 0 VDC |
| 1773425265 | 517 Count | 668 Count | 467 Count | 0 VDC | 0 VDC |
| 1773424360 | 496 Count | 641 Count | 448 Count | 0 VDC | 0 VDC |
| 1773423456 | 488 Count | 632 Count | 441 Count | 0 VDC | 0 VDC |
| 1773422552 | 475 Count | 618 Count | 429 Count | 0 VDC | 0 VDC |
| 1773421648 | 464 Count | 606 Count | 419 Count | 0 VDC | 0 VDC |
| 1773420743 | 454 Count | 591 Count | 410 Count | 0 VDC | 0 VDC |
| 1773419839 | 446 Count | 582 Count | 403 Count | 0 VDC | 0 VDC |
| 1773418935 | 434 Count | 566 Count | 392 Count | 0 VDC | 0 VDC |
| 1773418031 | 425 Count | 555 Count | 384 Count | 0 VDC | 0 VDC |
| 1773417125 | 412 Count | 537 Count | 372 Count | 0 VDC | 0 VDC |
| 1773416220 | 400 Count | 521 Count | 361 Count | 0 VDC | 0 VDC |
| 1773415316 | 387 Count | 501 Count | 349 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)