This is the latest recevied telemetry packets stored in our database for station/object SK3BP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793633555 | 132 Count | 426 Count | 116 Count | 0 VDC | 0 VDC |
| 1793631752 | 125 Count | 388 Count | 110 Count | 0 VDC | 0 VDC |
| 1793629948 | 114 Count | 359 Count | 100 Count | 0 VDC | 0 VDC |
| 1793628145 | 108 Count | 334 Count | 95 Count | 0 VDC | 0 VDC |
| 1793626342 | 99 Count | 304 Count | 87 Count | 0 VDC | 0 VDC |
| 1793624539 | 90 Count | 254 Count | 79 Count | 0 VDC | 0 VDC |
| 1793622735 | 83 Count | 231 Count | 73 Count | 0 VDC | 0 VDC |
| 1793620932 | 72 Count | 200 Count | 63 Count | 0 VDC | 0 VDC |
| 1793619129 | 65 Count | 174 Count | 57 Count | 0 VDC | 0 VDC |
| 1793617326 | 55 Count | 138 Count | 48 Count | 0 VDC | 0 VDC |
| 1793615523 | 38 Count | 101 Count | 32 Count | 0 VDC | 0 VDC |
| 1793611952 | 9 Count | 28 Count | 9 Count | 0 VDC | 0 VDC |
| 1793610149 | 330 Count | 1008 Count | 290 Count | 0 VDC | 0 VDC |
| 1793608346 | 322 Count | 982 Count | 283 Count | 0 VDC | 0 VDC |
| 1793606543 | 314 Count | 954 Count | 276 Count | 0 VDC | 0 VDC |
| 1793604739 | 306 Count | 931 Count | 269 Count | 0 VDC | 0 VDC |
| 1793602936 | 296 Count | 903 Count | 260 Count | 0 VDC | 0 VDC |
| 1793601133 | 287 Count | 872 Count | 252 Count | 0 VDC | 0 VDC |
| 1793599330 | 276 Count | 843 Count | 242 Count | 0 VDC | 0 VDC |
| 1793597528 | 269 Count | 812 Count | 236 Count | 0 VDC | 0 VDC |
| 1793595723 | 259 Count | 774 Count | 227 Count | 0 VDC | 0 VDC |
| 1793593920 | 249 Count | 745 Count | 218 Count | 0 VDC | 0 VDC |
| 1793590349 | 228 Count | 692 Count | 203 Count | 0 VDC | 0 VDC |
| 1793588546 | 218 Count | 657 Count | 194 Count | 0 VDC | 0 VDC |
| 1793586743 | 209 Count | 634 Count | 186 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)