This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793632049 | 388 Count | 886 Count | 308 Count | 3.63 VDC | 0 VDC |
| 1793631937 | 387 Count | 886 Count | 308 Count | 3.52 VDC | 0 VDC |
| 1793631337 | 379 Count | 866 Count | 301 Count | 3.52 VDC | 0 VDC |
| 1793630736 | 365 Count | 837 Count | 290 Count | 3.53 VDC | 0 VDC |
| 1793630135 | 358 Count | 822 Count | 285 Count | 3.53 VDC | 0 VDC |
| 1793629535 | 346 Count | 798 Count | 276 Count | 3.53 VDC | 0 VDC |
| 1793628934 | 336 Count | 777 Count | 268 Count | 3.53 VDC | 0 VDC |
| 1793628334 | 326 Count | 761 Count | 261 Count | 3.53 VDC | 0 VDC |
| 1793627733 | 316 Count | 739 Count | 253 Count | 3.54 VDC | 0 VDC |
| 1793627132 | 305 Count | 719 Count | 244 Count | 3.54 VDC | 0 VDC |
| 1793626531 | 292 Count | 699 Count | 234 Count | 3.54 VDC | 0 VDC |
| 1793625930 | 274 Count | 663 Count | 218 Count | 3.55 VDC | 0 VDC |
| 1793625330 | 256 Count | 630 Count | 203 Count | 3.55 VDC | 0 VDC |
| 1793624729 | 240 Count | 599 Count | 189 Count | 3.55 VDC | 0 VDC |
| 1793624128 | 222 Count | 567 Count | 174 Count | 3.55 VDC | 0 VDC |
| 1793623528 | 209 Count | 549 Count | 163 Count | 3.55 VDC | 0 VDC |
| 1793622927 | 200 Count | 531 Count | 156 Count | 3.56 VDC | 0 VDC |
| 1793622327 | 189 Count | 512 Count | 149 Count | 3.56 VDC | 0 VDC |
| 1793621726 | 176 Count | 490 Count | 138 Count | 3.57 VDC | 0 VDC |
| 1793621125 | 159 Count | 463 Count | 124 Count | 3.57 VDC | 0 VDC |
| 1793620525 | 143 Count | 427 Count | 110 Count | 3.59 VDC | 0 VDC |
| 1793619924 | 119 Count | 391 Count | 89 Count | 3.59 VDC | 0 VDC |
| 1793619323 | 113 Count | 379 Count | 85 Count | 3.59 VDC | 0 VDC |
| 1793618723 | 106 Count | 359 Count | 79 Count | 3.59 VDC | 0 VDC |
| 1793618122 | 97 Count | 345 Count | 73 Count | 3.59 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)