This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793631988 | 269 Count | 501 Count | 218 Count | 4.13 VDC | 0 VDC |
| 1793631387 | 261 Count | 482 Count | 211 Count | 4.13 VDC | 0 VDC |
| 1793630786 | 248 Count | 456 Count | 201 Count | 4.12 VDC | 0 VDC |
| 1793630186 | 240 Count | 442 Count | 195 Count | 4.1 VDC | 0 VDC |
| 1793629585 | 228 Count | 416 Count | 186 Count | 4.11 VDC | 0 VDC |
| 1793628985 | 219 Count | 398 Count | 179 Count | 4.11 VDC | 0 VDC |
| 1793628384 | 210 Count | 381 Count | 172 Count | 4.13 VDC | 0 VDC |
| 1793627783 | 198 Count | 359 Count | 163 Count | 4.11 VDC | 0 VDC |
| 1793627183 | 188 Count | 342 Count | 155 Count | 4.13 VDC | 0 VDC |
| 1793626582 | 175 Count | 322 Count | 145 Count | 4.11 VDC | 0 VDC |
| 1793625981 | 157 Count | 284 Count | 129 Count | 4.12 VDC | 0 VDC |
| 1793625380 | 141 Count | 258 Count | 116 Count | 4.12 VDC | 0 VDC |
| 1793624779 | 124 Count | 225 Count | 101 Count | 4.12 VDC | 0 VDC |
| 1793624179 | 107 Count | 194 Count | 86 Count | 4.12 VDC | 0 VDC |
| 1793623578 | 95 Count | 175 Count | 77 Count | 4.12 VDC | 0 VDC |
| 1793622977 | 85 Count | 155 Count | 69 Count | 4.11 VDC | 0 VDC |
| 1793622376 | 74 Count | 137 Count | 62 Count | 4.11 VDC | 0 VDC |
| 1793621776 | 63 Count | 118 Count | 53 Count | 4.11 VDC | 0 VDC |
| 1793621175 | 47 Count | 92 Count | 40 Count | 4.12 VDC | 0 VDC |
| 1793619974 | 14 Count | 30 Count | 11 Count | 4.13 VDC | 0 VDC |
| 1793619373 | 3 Count | 14 Count | 3 Count | 4.13 VDC | 0 VDC |
| 1793618772 | 394 Count | 1008 Count | 271 Count | 4.12 VDC | 0 VDC |
| 1793618172 | 388 Count | 997 Count | 268 Count | 4.13 VDC | 0 VDC |
| 1793617571 | 381 Count | 982 Count | 263 Count | 4.12 VDC | 0 VDC |
| 1793616970 | 374 Count | 970 Count | 259 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)