This is the latest recevied telemetry packets stored in our database for station/object IW2EJH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1761873328 | 3.41 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1761871528 | 3.47 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1761869728 | 3.5 VDC | 1.06 VDC | 0 | 0 | 0 |
| 1761867928 | 3.53 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1761866128 | 3.55 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1761864327 | 3.58 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1761862527 | 3.59 VDC | 1.1 VDC | 0 | 0 | 0 |
| 1761860727 | 3.61 VDC | 1.08 VDC | 0 | 0 | 0 |
| 1761858927 | 3.62 VDC | 1.02 VDC | 0 | 0 | 0 |
| 1761857127 | 3.63 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1761855327 | 3.63 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1761853527 | 3.64 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1761851727 | 3.65 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1761849927 | 3.66 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1761848126 | 3.59 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1761846326 | 3.68 VDC | 1.3 VDC | 0 | 0 | 0 |
| 1761844526 | 3.69 VDC | 1.2 VDC | 0 | 0 | 0 |
| 1761842726 | 3.7 VDC | 1.2 VDC | 0 | 0 | 0 |
| 1761840926 | 3.71 VDC | 1.32 VDC | 0 | 0 | 0 |
| 1761837326 | 3.68 VDC | 3.42 VDC | 0 | 0 | 0 |
| 1761835526 | 3.71 VDC | 3.56 VDC | 0 | 0 | 0 |
| 1761833726 | 3.72 VDC | 0.72 VDC | 0 | 0 | 0 |
| 1761831926 | 3.8 VDC | 1.04 VDC | 0 | 0 | 0 |
| 1761830125 | 3.81 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1761828325 | 3.91 VDC | 1.16 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)