This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1746322560 | 2.93 VDC | 0 | 0 | 0 | 0 |
| 1746321657 | 2.97 VDC | 0 | 0 | 0 | 0 |
| 1746320754 | 3 VDC | 0 | 0 | 0 | 0 |
| 1746319851 | 3.04 VDC | 0 | 0 | 0 | 0 |
| 1746319148 | 3.06 VDC | 0 | 0 | 0 | 0 |
| 1746318245 | 3.08 VDC | 0 | 0 | 0 | 0 |
| 1746317342 | 3.11 VDC | 0 | 0 | 0 | 0 |
| 1746316439 | 3.13 VDC | 0 | 0 | 0 | 0 |
| 1746315536 | 3.15 VDC | 0 | 0 | 0 | 0 |
| 1746314633 | 3.18 VDC | 0 | 0 | 0 | 0 |
| 1746313730 | 3.2 VDC | 0 | 0 | 0 | 0 |
| 1746312827 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1746311924 | 3.25 VDC | 0 | 0 | 0 | 0 |
| 1746311021 | 3.26 VDC | 0 | 0 | 0 | 0 |
| 1746310118 | 3.28 VDC | 0 | 0 | 0 | 0 |
| 1746309215 | 3.29 VDC | 0 | 0 | 0 | 0 |
| 1746308312 | 3.31 VDC | 0 | 0 | 0 | 0 |
| 1746307409 | 3.33 VDC | 0 | 0 | 0 | 0 |
| 1746306506 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1746305603 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1746304700 | 3.37 VDC | 0 | 0 | 0 | 0 |
| 1746303797 | 3.39 VDC | 0 | 0 | 0 | 0 |
| 1746302894 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1746301991 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1746301088 | 3.42 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)