This is the latest recevied telemetry packets stored in our database for station/object DG0MG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Ubat* | TxPwr* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1749994184 | 31 degC | 4.25 V | 12 dBm | 0 | 0 |
| 1749993882 | 32.5 degC | 4.25 V | 14 dBm | 0 | 0 |
| 1749992671 | 32.4 degC | 4.25 V | 14 dBm | 0 | 0 |
| 1749992067 | 30.7 degC | 4.25 V | 14 dBm | 0 | 0 |
| 1749991763 | 30.1 degC | 4.26 V | 8 dBm | 0 | 0 |
| 1749991461 | 31 degC | 4.26 V | 14 dBm | 0 | 0 |
| 1749990856 | 30.1 degC | 4.25 V | 14 dBm | 0 | 0 |
| 1749990551 | 28.8 degC | 4.25 V | 10 dBm | 0 | 0 |
| 1749989645 | 28 degC | 4.26 V | 14 dBm | 0 | 0 |
| 1749989039 | 28 degC | 4.25 V | 14 dBm | 0 | 0 |
| 1749988738 | 28.4 degC | 4.26 V | 13 dBm | 0 | 0 |
| 1749988436 | 30.1 degC | 4.26 V | 14 dBm | 0 | 0 |
| 1749988132 | 29.3 degC | 4.26 V | 6 dBm | 0 | 0 |
| 1749987829 | 29 degC | 4.25 V | 14 dBm | 0 | 0 |
| 1749987220 | 29.2 degC | 4.26 V | 14 dBm | 0 | 0 |
| 1749986616 | 29.7 degC | 4.26 V | 14 dBm | 0 | 0 |
| 1749986314 | 29 degC | 4.26 V | 9 dBm | 0 | 0 |
| 1749986012 | 29 degC | 4.26 V | 14 dBm | 0 | 0 |
| 1749985711 | 30 degC | 4.27 V | 10 dBm | 0 | 0 |
| 1749985409 | 30.4 degC | 4.26 V | 14 dBm | 0 | 0 |
| 1749984805 | 30.5 degC | 4.26 V | 14 dBm | 0 | 0 |
| 1749984500 | 29.6 degC | 4.26 V | 12 dBm | 0 | 0 |
| 1749983591 | 29.2 degC | 4.26 V | 14 dBm | 0 | 0 |
| 1749982988 | 29.7 degC | 4.25 V | 14 dBm | 0 | 0 |
| 1749982684 | 30.6 degC | 4.25 V | 7 dBm | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, -273
Ubat: 0, 0.001, 0
TxPwr: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)