This is the latest recevied telemetry packets stored in our database for station/object F5ZYM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781416184 | 41 Count | 255 Count | 34 Count | 0 VDC | 0 VDC |
| 1781415279 | 37 Count | 225 Count | 31 Count | 0 VDC | 0 VDC |
| 1781414375 | 30 Count | 196 Count | 25 Count | 0 VDC | 0 VDC |
| 1781413471 | 25 Count | 163 Count | 21 Count | 0 VDC | 0 VDC |
| 1781412567 | 19 Count | 135 Count | 16 Count | 0 VDC | 0 VDC |
| 1781411663 | 12 Count | 95 Count | 10 Count | 0 VDC | 0 VDC |
| 1781410759 | 7 Count | 58 Count | 6 Count | 0 VDC | 0 VDC |
| 1781409855 | 3 Count | 30 Count | 3 Count | 0 VDC | 0 VDC |
| 1781408951 | 377 Count | 1014 Count | 287 Count | 0 VDC | 0 VDC |
| 1781408047 | 372 Count | 990 Count | 283 Count | 0 VDC | 0 VDC |
| 1781407143 | 367 Count | 966 Count | 279 Count | 0 VDC | 0 VDC |
| 1781406239 | 362 Count | 947 Count | 275 Count | 0 VDC | 0 VDC |
| 1781405335 | 356 Count | 926 Count | 270 Count | 0 VDC | 0 VDC |
| 1781404431 | 351 Count | 909 Count | 266 Count | 0 VDC | 0 VDC |
| 1781403629 | 346 Count | 895 Count | 262 Count | 0 VDC | 0 VDC |
| 1781402725 | 341 Count | 876 Count | 258 Count | 0 VDC | 0 VDC |
| 1781401821 | 335 Count | 858 Count | 253 Count | 0 VDC | 0 VDC |
| 1781400917 | 332 Count | 841 Count | 251 Count | 0 VDC | 0 VDC |
| 1781400013 | 328 Count | 826 Count | 248 Count | 0 VDC | 0 VDC |
| 1781399109 | 325 Count | 811 Count | 246 Count | 0 VDC | 0 VDC |
| 1781398204 | 319 Count | 794 Count | 241 Count | 0 VDC | 0 VDC |
| 1781397300 | 315 Count | 778 Count | 238 Count | 0 VDC | 0 VDC |
| 1781396395 | 311 Count | 764 Count | 235 Count | 0 VDC | 0 VDC |
| 1781395491 | 304 Count | 746 Count | 229 Count | 0 VDC | 0 VDC |
| 1781394588 | 301 Count | 737 Count | 227 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)