This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778681906 | 244 Count | 737 Count | 230 Count | 4.08 VDC | 0 VDC |
| 1778680105 | 226 Count | 681 Count | 213 Count | 4.11 VDC | 0 VDC |
| 1778678305 | 206 Count | 623 Count | 194 Count | 4.09 VDC | 0 VDC |
| 1778676504 | 190 Count | 563 Count | 179 Count | 4.12 VDC | 0 VDC |
| 1778674703 | 168 Count | 495 Count | 158 Count | 4.07 VDC | 0 VDC |
| 1778672902 | 146 Count | 433 Count | 137 Count | 4.11 VDC | 0 VDC |
| 1778671102 | 97 Count | 326 Count | 89 Count | 4.07 VDC | 0 VDC |
| 1778669301 | 76 Count | 262 Count | 69 Count | 4.09 VDC | 0 VDC |
| 1778667500 | 58 Count | 196 Count | 52 Count | 4.11 VDC | 0 VDC |
| 1778665708 | 36 Count | 132 Count | 35 Count | 4.08 VDC | 0 VDC |
| 1778663907 | 15 Count | 58 Count | 15 Count | 4.08 VDC | 0 VDC |
| 1778662106 | 320 Count | 1051 Count | 303 Count | 4.08 VDC | 0 VDC |
| 1778660305 | 288 Count | 974 Count | 272 Count | 4.12 VDC | 0 VDC |
| 1778658505 | 267 Count | 904 Count | 252 Count | 4.09 VDC | 0 VDC |
| 1778656704 | 248 Count | 836 Count | 234 Count | 4.11 VDC | 0 VDC |
| 1778654903 | 228 Count | 770 Count | 215 Count | 4.08 VDC | 0 VDC |
| 1778653103 | 209 Count | 707 Count | 197 Count | 4.09 VDC | 0 VDC |
| 1778651302 | 190 Count | 641 Count | 179 Count | 4.09 VDC | 0 VDC |
| 1778649501 | 171 Count | 574 Count | 161 Count | 4.09 VDC | 0 VDC |
| 1778647701 | 152 Count | 501 Count | 143 Count | 4.11 VDC | 0 VDC |
| 1778645900 | 133 Count | 421 Count | 125 Count | 4.09 VDC | 0 VDC |
| 1778644107 | 108 Count | 346 Count | 105 Count | 4.1 VDC | 0 VDC |
| 1778642307 | 66 Count | 237 Count | 64 Count | 4.09 VDC | 0 VDC |
| 1778640506 | 45 Count | 161 Count | 44 Count | 4.09 VDC | 0 VDC |
| 1778638705 | 21 Count | 76 Count | 21 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)