This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1760007036 | 154 Count | 701 Count | 144 Count | 4.33 VDC | 0 VDC |
| 1760006136 | 140 Count | 635 Count | 131 Count | 4.31 VDC | 0 VDC |
| 1760005235 | 128 Count | 568 Count | 120 Count | 4.33 VDC | 0 VDC |
| 1760004334 | 113 Count | 519 Count | 106 Count | 4.3 VDC | 0 VDC |
| 1760003434 | 98 Count | 462 Count | 92 Count | 4.32 VDC | 0 VDC |
| 1760002533 | 82 Count | 399 Count | 77 Count | 4.32 VDC | 0 VDC |
| 1760001632 | 70 Count | 329 Count | 66 Count | 4.31 VDC | 0 VDC |
| 1760000732 | 56 Count | 260 Count | 53 Count | 4.31 VDC | 0 VDC |
| 1759999846 | 44 Count | 190 Count | 42 Count | 4.3 VDC | 0 VDC |
| 1759998945 | 26 Count | 118 Count | 25 Count | 4.32 VDC | 0 VDC |
| 1759998044 | 12 Count | 53 Count | 12 Count | 4.29 VDC | 0 VDC |
| 1759997144 | 213 Count | 1011 Count | 199 Count | 4.29 VDC | 0 VDC |
| 1759996243 | 198 Count | 920 Count | 185 Count | 4.31 VDC | 0 VDC |
| 1759995342 | 183 Count | 861 Count | 171 Count | 4.32 VDC | 0 VDC |
| 1759994442 | 168 Count | 792 Count | 157 Count | 4.3 VDC | 0 VDC |
| 1759993541 | 153 Count | 737 Count | 143 Count | 4.3 VDC | 0 VDC |
| 1759992641 | 139 Count | 684 Count | 130 Count | 4.33 VDC | 0 VDC |
| 1759991740 | 127 Count | 615 Count | 119 Count | 4.28 VDC | 0 VDC |
| 1759990839 | 112 Count | 534 Count | 105 Count | 4.3 VDC | 0 VDC |
| 1759989939 | 97 Count | 466 Count | 91 Count | 4.3 VDC | 0 VDC |
| 1759989038 | 83 Count | 385 Count | 78 Count | 4.34 VDC | 0 VDC |
| 1759988137 | 69 Count | 318 Count | 65 Count | 4.32 VDC | 0 VDC |
| 1759987237 | 54 Count | 248 Count | 51 Count | 4.28 VDC | 0 VDC |
| 1759986336 | 40 Count | 196 Count | 38 Count | 4.33 VDC | 0 VDC |
| 1759985435 | 27 Count | 139 Count | 26 Count | 4.31 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)