This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781424004 | 618 Count | 547 Count | 546 Count | 4 VDC | 0 VDC |
| 1781422203 | 605 Count | 535 Count | 534 Count | 4 VDC | 0 VDC |
| 1781420402 | 592 Count | 523 Count | 522 Count | 4 VDC | 0 VDC |
| 1781418601 | 579 Count | 511 Count | 510 Count | 4 VDC | 0 VDC |
| 1781416801 | 565 Count | 498 Count | 497 Count | 4 VDC | 0 VDC |
| 1781415000 | 552 Count | 486 Count | 485 Count | 4.01 VDC | 0 VDC |
| 1781413199 | 539 Count | 474 Count | 473 Count | 4 VDC | 0 VDC |
| 1781411398 | 527 Count | 463 Count | 462 Count | 4 VDC | 0 VDC |
| 1781409597 | 515 Count | 452 Count | 451 Count | 4 VDC | 0 VDC |
| 1781407796 | 502 Count | 440 Count | 439 Count | 4 VDC | 0 VDC |
| 1781405995 | 489 Count | 428 Count | 427 Count | 4 VDC | 0 VDC |
| 1781404195 | 476 Count | 416 Count | 415 Count | 4 VDC | 0 VDC |
| 1781402405 | 462 Count | 403 Count | 402 Count | 4 VDC | 0 VDC |
| 1781400605 | 450 Count | 392 Count | 391 Count | 4.01 VDC | 0 VDC |
| 1781398804 | 437 Count | 380 Count | 379 Count | 4.01 VDC | 0 VDC |
| 1781397003 | 422 Count | 366 Count | 365 Count | 4.01 VDC | 0 VDC |
| 1781395202 | 410 Count | 355 Count | 354 Count | 4 VDC | 0 VDC |
| 1781393401 | 398 Count | 344 Count | 343 Count | 3.99 VDC | 0 VDC |
| 1781391599 | 385 Count | 332 Count | 331 Count | 4.01 VDC | 0 VDC |
| 1781389798 | 372 Count | 320 Count | 319 Count | 4.01 VDC | 0 VDC |
| 1781387998 | 359 Count | 308 Count | 307 Count | 4.01 VDC | 0 VDC |
| 1781386197 | 346 Count | 296 Count | 295 Count | 3.99 VDC | 0 VDC |
| 1781384396 | 332 Count | 283 Count | 282 Count | 4 VDC | 0 VDC |
| 1781382595 | 317 Count | 269 Count | 268 Count | 4 VDC | 0 VDC |
| 1781380803 | 304 Count | 257 Count | 256 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)