This is the latest recevied telemetry packets stored in our database for station/object LW2DHT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778732683 | 766 Count | 829 Count | 533 Count | 0 VDC | 0 VDC |
| 1778730879 | 763 Count | 825 Count | 531 Count | 0 VDC | 0 VDC |
| 1778729076 | 737 Count | 821 Count | 528 Count | 0 VDC | 0 VDC |
| 1778727272 | 724 Count | 817 Count | 525 Count | 0 VDC | 0 VDC |
| 1778725468 | 718 Count | 811 Count | 520 Count | 0 VDC | 0 VDC |
| 1778723710 | 715 Count | 807 Count | 518 Count | 0 VDC | 0 VDC |
| 1778721906 | 711 Count | 803 Count | 515 Count | 0 VDC | 0 VDC |
| 1778720102 | 708 Count | 800 Count | 513 Count | 0 VDC | 0 VDC |
| 1778718299 | 699 Count | 797 Count | 510 Count | 0 VDC | 0 VDC |
| 1778716495 | 696 Count | 793 Count | 508 Count | 0 VDC | 0 VDC |
| 1778714691 | 691 Count | 787 Count | 504 Count | 0 VDC | 0 VDC |
| 1778712887 | 687 Count | 783 Count | 501 Count | 0 VDC | 0 VDC |
| 1778711083 | 685 Count | 780 Count | 500 Count | 0 VDC | 0 VDC |
| 1778709279 | 681 Count | 776 Count | 497 Count | 0 VDC | 0 VDC |
| 1778707475 | 679 Count | 772 Count | 496 Count | 0 VDC | 0 VDC |
| 1778705671 | 675 Count | 768 Count | 493 Count | 0 VDC | 0 VDC |
| 1778703867 | 669 Count | 763 Count | 488 Count | 0 VDC | 0 VDC |
| 1778702109 | 664 Count | 757 Count | 484 Count | 0 VDC | 0 VDC |
| 1778700306 | 661 Count | 753 Count | 482 Count | 0 VDC | 0 VDC |
| 1778698502 | 657 Count | 749 Count | 479 Count | 0 VDC | 0 VDC |
| 1778696698 | 652 Count | 743 Count | 475 Count | 0 VDC | 0 VDC |
| 1778694894 | 648 Count | 739 Count | 472 Count | 0 VDC | 0 VDC |
| 1778693090 | 643 Count | 734 Count | 468 Count | 0 VDC | 0 VDC |
| 1778691286 | 639 Count | 728 Count | 465 Count | 0 VDC | 0 VDC |
| 1778689482 | 636 Count | 724 Count | 463 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)