This is the latest recevied telemetry packets stored in our database for station/object SP9APJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773450457 | 197 Count | 798 Count | 160 Count | 0 VDC | 0 VDC |
| 1773448656 | 190 Count | 756 Count | 154 Count | 0 VDC | 0 VDC |
| 1773446862 | 182 Count | 732 Count | 151 Count | 0 VDC | 0 VDC |
| 1773445061 | 176 Count | 711 Count | 146 Count | 0 VDC | 0 VDC |
| 1773443261 | 169 Count | 676 Count | 140 Count | 0 VDC | 0 VDC |
| 1773441460 | 164 Count | 645 Count | 136 Count | 0 VDC | 0 VDC |
| 1773434258 | 135 Count | 533 Count | 111 Count | 0 VDC | 0 VDC |
| 1773432457 | 124 Count | 495 Count | 101 Count | 0 VDC | 0 VDC |
| 1773425265 | 99 Count | 361 Count | 84 Count | 0 VDC | 0 VDC |
| 1773419861 | 76 Count | 270 Count | 64 Count | 0 VDC | 0 VDC |
| 1773418060 | 64 Count | 220 Count | 53 Count | 0 VDC | 0 VDC |
| 1773416260 | 58 Count | 193 Count | 48 Count | 0 VDC | 0 VDC |
| 1773414458 | 40 Count | 154 Count | 31 Count | 0 VDC | 0 VDC |
| 1773412657 | 30 Count | 124 Count | 22 Count | 0 VDC | 0 VDC |
| 1773410857 | 24 Count | 100 Count | 17 Count | 0 VDC | 0 VDC |
| 1773407256 | 12 Count | 42 Count | 7 Count | 0 VDC | 0 VDC |
| 1773405454 | 7 Count | 19 Count | 3 Count | 0 VDC | 0 VDC |
| 1773403660 | 239 Count | 1024 Count | 198 Count | 0 VDC | 0 VDC |
| 1773400058 | 228 Count | 966 Count | 189 Count | 0 VDC | 0 VDC |
| 1773398258 | 221 Count | 937 Count | 183 Count | 0 VDC | 0 VDC |
| 1773396457 | 215 Count | 908 Count | 178 Count | 0 VDC | 0 VDC |
| 1773394656 | 205 Count | 871 Count | 169 Count | 0 VDC | 0 VDC |
| 1773392856 | 193 Count | 829 Count | 158 Count | 0 VDC | 0 VDC |
| 1773391055 | 188 Count | 806 Count | 154 Count | 0 VDC | 0 VDC |
| 1773389255 | 182 Count | 779 Count | 149 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)