This is the latest recevied telemetry packets stored in our database for station/object SR9SRC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770097268 | 0 Count | 846 Count | 0 Count | 0 VDC | 0 VDC |
| 1770096668 | 0 Count | 827 Count | 0 Count | 0 VDC | 0 VDC |
| 1770096068 | 0 Count | 815 Count | 0 Count | 0 VDC | 0 VDC |
| 1770095468 | 0 Count | 797 Count | 0 Count | 0 VDC | 0 VDC |
| 1770094868 | 0 Count | 784 Count | 0 Count | 0 VDC | 0 VDC |
| 1770094268 | 0 Count | 763 Count | 0 Count | 0 VDC | 0 VDC |
| 1770093668 | 0 Count | 747 Count | 0 Count | 0 VDC | 0 VDC |
| 1770093068 | 0 Count | 735 Count | 0 Count | 0 VDC | 0 VDC |
| 1770092470 | 0 Count | 719 Count | 0 Count | 0 VDC | 0 VDC |
| 1770091870 | 0 Count | 712 Count | 0 Count | 0 VDC | 0 VDC |
| 1770091270 | 0 Count | 703 Count | 0 Count | 0 VDC | 0 VDC |
| 1770090670 | 0 Count | 696 Count | 0 Count | 0 VDC | 0 VDC |
| 1770090069 | 0 Count | 681 Count | 0 Count | 0 VDC | 0 VDC |
| 1770089469 | 0 Count | 666 Count | 0 Count | 0 VDC | 0 VDC |
| 1770088869 | 0 Count | 647 Count | 0 Count | 0 VDC | 0 VDC |
| 1770088269 | 0 Count | 633 Count | 0 Count | 0 VDC | 0 VDC |
| 1770087669 | 0 Count | 620 Count | 0 Count | 0 VDC | 0 VDC |
| 1770087069 | 0 Count | 605 Count | 0 Count | 0 VDC | 0 VDC |
| 1770086469 | 0 Count | 598 Count | 0 Count | 0 VDC | 0 VDC |
| 1770085869 | 0 Count | 590 Count | 0 Count | 0 VDC | 0 VDC |
| 1770085269 | 0 Count | 581 Count | 0 Count | 0 VDC | 0 VDC |
| 1770084669 | 0 Count | 577 Count | 0 Count | 0 VDC | 0 VDC |
| 1770084069 | 0 Count | 569 Count | 0 Count | 0 VDC | 0 VDC |
| 1770083469 | 0 Count | 561 Count | 0 Count | 0 VDC | 0 VDC |
| 1770082869 | 0 Count | 554 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)