This is the latest recevied telemetry packets stored in our database for station/object KJ0SHL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762222749 | 37.26 | 37.82 | -2.08 | 0 | 0 |
| 1762222150 | 37.26 | 37.82 | -2.08 | 0 | 0 |
| 1762221551 | 37.26 | 37.88 | -2.08 | 0 | 0 |
| 1762220952 | 37.26 | 37.88 | -2.08 | 0 | 0 |
| 1762219155 | 37.35 | 38.06 | -2.08 | 0 | 0 |
| 1762217956 | 37.35 | 38.12 | -2.08 | 0 | 0 |
| 1762217356 | 37.35 | 38.18 | -2.08 | 0 | 0 |
| 1762216757 | 37.35 | 38.18 | -2.08 | 0 | 0 |
| 1762216157 | 37.35 | 38.24 | -2.08 | 0 | 0 |
| 1762215557 | 37.35 | 38.24 | -2.08 | 0 | 0 |
| 1762214958 | 37.35 | 38.3 | -2.08 | 0 | 0 |
| 1762214358 | 37.44 | 38.3 | -2.08 | 0 | 0 |
| 1762213158 | 37.44 | 38.36 | -2.08 | 0 | 0 |
| 1762212559 | 37.44 | 38.43 | -2.08 | 0 | 0 |
| 1762211959 | 37.44 | 38.49 | -2.08 | 0 | 0 |
| 1762210759 | 37.44 | 38.55 | -2.08 | 0 | 0 |
| 1762210159 | 37.53 | 38.61 | -2.08 | 0 | 0 |
| 1762209559 | 37.26 | 38.61 | -2.08 | 0 | 0 |
| 1762207733 | 42.75 | 38.43 | -2.08 | 0 | 0 |
| 1762207498 | 42.75 | 38.36 | -2.08 | 0 | 0 |
| 1762207393 | 42.21 | 38.36 | -2.08 | 0 | 0 |
| 1762201586 | 42.75 | 37.88 | -2.08 | 0 | 0 |
| 1762199976 | 36.81 | 37.21 | -2.08 | 0 | 0 |
| 1762198779 | 36.9 | 37.09 | -2.08 | 0 | 0 |
| 1762196984 | 36.9 | 37.03 | -2.08 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.09, 0
Value2: 0, 0.0608, 0
Value3: 0, 0.0215, -2.08
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)