This is the latest recevied telemetry packets stored in our database for station/object GM4ISM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792446802 | 163 Count | 929 Count | 141 Count | 0 VDC | 0 VDC |
| 1792444999 | 156 Count | 891 Count | 135 Count | 0 VDC | 0 VDC |
| 1792443196 | 148 Count | 841 Count | 128 Count | 0 VDC | 0 VDC |
| 1792441393 | 141 Count | 819 Count | 122 Count | 0 VDC | 0 VDC |
| 1792439590 | 134 Count | 777 Count | 116 Count | 0 VDC | 0 VDC |
| 1792437786 | 128 Count | 747 Count | 111 Count | 0 VDC | 0 VDC |
| 1792435983 | 120 Count | 685 Count | 104 Count | 0 VDC | 0 VDC |
| 1792434180 | 114 Count | 638 Count | 99 Count | 0 VDC | 0 VDC |
| 1792432377 | 107 Count | 596 Count | 93 Count | 0 VDC | 0 VDC |
| 1792430574 | 101 Count | 555 Count | 88 Count | 0 VDC | 0 VDC |
| 1792428771 | 92 Count | 493 Count | 80 Count | 0 VDC | 0 VDC |
| 1792427004 | 84 Count | 468 Count | 73 Count | 0 VDC | 0 VDC |
| 1792425201 | 75 Count | 429 Count | 65 Count | 0 VDC | 0 VDC |
| 1792423398 | 68 Count | 386 Count | 59 Count | 0 VDC | 0 VDC |
| 1792421595 | 60 Count | 343 Count | 52 Count | 0 VDC | 0 VDC |
| 1792419792 | 43 Count | 287 Count | 36 Count | 0 VDC | 0 VDC |
| 1792417989 | 36 Count | 246 Count | 30 Count | 0 VDC | 0 VDC |
| 1792416185 | 30 Count | 209 Count | 25 Count | 0 VDC | 0 VDC |
| 1792414382 | 22 Count | 168 Count | 18 Count | 0 VDC | 0 VDC |
| 1792412579 | 15 Count | 128 Count | 12 Count | 0 VDC | 0 VDC |
| 1792410776 | 10 Count | 103 Count | 8 Count | 0 VDC | 0 VDC |
| 1792408973 | 5 Count | 59 Count | 4 Count | 0 VDC | 0 VDC |
| 1792407170 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1792405404 | 141 Count | 984 Count | 118 Count | 0 VDC | 0 VDC |
| 1792403601 | 137 Count | 950 Count | 115 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)