This is the latest recevied telemetry packets stored in our database for station/object SQ2MTG-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793635345 | 259 Count | 676 Count | 225 Count | 4.14 VDC | 0 VDC |
| 1793634443 | 252 Count | 651 Count | 219 Count | 4.13 VDC | 0 VDC |
| 1793633542 | 245 Count | 635 Count | 213 Count | 4.13 VDC | 0 VDC |
| 1793632641 | 232 Count | 598 Count | 201 Count | 4.13 VDC | 0 VDC |
| 1793631741 | 211 Count | 536 Count | 181 Count | 4.14 VDC | 0 VDC |
| 1793630840 | 200 Count | 500 Count | 171 Count | 4.13 VDC | 0 VDC |
| 1793629939 | 186 Count | 472 Count | 158 Count | 4.14 VDC | 0 VDC |
| 1793629038 | 174 Count | 443 Count | 147 Count | 4.13 VDC | 0 VDC |
| 1793628137 | 167 Count | 424 Count | 141 Count | 4.13 VDC | 0 VDC |
| 1793627236 | 161 Count | 410 Count | 136 Count | 4.13 VDC | 0 VDC |
| 1793626336 | 154 Count | 395 Count | 130 Count | 4.13 VDC | 0 VDC |
| 1793625435 | 150 Count | 385 Count | 127 Count | 4.13 VDC | 0 VDC |
| 1793624534 | 144 Count | 366 Count | 122 Count | 4.13 VDC | 0 VDC |
| 1793623633 | 133 Count | 341 Count | 112 Count | 4.14 VDC | 0 VDC |
| 1793622732 | 127 Count | 322 Count | 107 Count | 4.13 VDC | 0 VDC |
| 1793621832 | 117 Count | 299 Count | 98 Count | 4.13 VDC | 0 VDC |
| 1793620950 | 105 Count | 280 Count | 91 Count | 4.13 VDC | 0 VDC |
| 1793620049 | 100 Count | 264 Count | 87 Count | 4.13 VDC | 0 VDC |
| 1793619148 | 92 Count | 246 Count | 80 Count | 4.13 VDC | 0 VDC |
| 1793618248 | 87 Count | 231 Count | 76 Count | 4.13 VDC | 0 VDC |
| 1793617347 | 76 Count | 211 Count | 66 Count | 4.13 VDC | 0 VDC |
| 1793616446 | 67 Count | 192 Count | 58 Count | 4.13 VDC | 0 VDC |
| 1793615545 | 60 Count | 174 Count | 52 Count | 4.13 VDC | 0 VDC |
| 1793614644 | 54 Count | 157 Count | 47 Count | 4.13 VDC | 0 VDC |
| 1793613743 | 49 Count | 142 Count | 43 Count | 4.14 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)