This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778674689 | 212 Count | 157 Count | 157 Count | 3.89 VDC | 0.14 VDC |
| 1778671084 | 211 Count | 157 Count | 157 Count | 3.93 VDC | 0.14 VDC |
| 1778667512 | 210 Count | 157 Count | 157 Count | 3.93 VDC | 0.14 VDC |
| 1778645913 | 182 Count | 135 Count | 135 Count | 3.86 VDC | 0.14 VDC |
| 1778642308 | 181 Count | 135 Count | 135 Count | 3.85 VDC | 0.14 VDC |
| 1778638703 | 180 Count | 135 Count | 135 Count | 3.87 VDC | 0.14 VDC |
| 1778635097 | 179 Count | 135 Count | 135 Count | 3.85 VDC | 0.14 VDC |
| 1778631491 | 178 Count | 135 Count | 135 Count | 3.89 VDC | 0.14 VDC |
| 1778627886 | 177 Count | 135 Count | 135 Count | 3.89 VDC | 0.14 VDC |
| 1778624309 | 176 Count | 135 Count | 135 Count | 3.91 VDC | 0.14 VDC |
| 1778620704 | 175 Count | 135 Count | 135 Count | 3.87 VDC | 0.14 VDC |
| 1778617097 | 174 Count | 135 Count | 135 Count | 3.92 VDC | 0.14 VDC |
| 1778613492 | 173 Count | 135 Count | 135 Count | 3.92 VDC | 0.14 VDC |
| 1778609887 | 172 Count | 135 Count | 135 Count | 3.92 VDC | 0.14 VDC |
| 1778606282 | 171 Count | 135 Count | 135 Count | 3.93 VDC | 0.14 VDC |
| 1778602711 | 170 Count | 135 Count | 135 Count | 3.94 VDC | 0.14 VDC |
| 1778599106 | 169 Count | 135 Count | 135 Count | 3.93 VDC | 0.14 VDC |
| 1778595500 | 159 Count | 126 Count | 126 Count | 3.95 VDC | 0.14 VDC |
| 1778591894 | 141 Count | 109 Count | 109 Count | 3.95 VDC | 0.14 VDC |
| 1778584682 | 139 Count | 109 Count | 109 Count | 3.94 VDC | 0.14 VDC |
| 1778581103 | 138 Count | 109 Count | 109 Count | 3.91 VDC | 0.14 VDC |
| 1778577498 | 137 Count | 109 Count | 109 Count | 3.91 VDC | 0.14 VDC |
| 1778573893 | 130 Count | 103 Count | 103 Count | 3.92 VDC | 0.14 VDC |
| 1778570287 | 124 Count | 98 Count | 98 Count | 3.94 VDC | 0.14 VDC |
| 1778566682 | 123 Count | 98 Count | 98 Count | 3.9 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)