This is the latest recevied telemetry packets stored in our database for station/object SR2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792386064 | 239 Count | 936 Count | 209 Count | 0 VDC | 0 VDC |
| 1792384263 | 230 Count | 907 Count | 201 Count | 0 VDC | 0 VDC |
| 1792382462 | 224 Count | 880 Count | 196 Count | 0 VDC | 0 VDC |
| 1792380662 | 217 Count | 847 Count | 190 Count | 0 VDC | 0 VDC |
| 1792378861 | 206 Count | 812 Count | 180 Count | 0 VDC | 0 VDC |
| 1792377061 | 199 Count | 783 Count | 174 Count | 0 VDC | 0 VDC |
| 1792375260 | 191 Count | 753 Count | 167 Count | 0 VDC | 0 VDC |
| 1792373459 | 183 Count | 725 Count | 160 Count | 0 VDC | 0 VDC |
| 1792371659 | 177 Count | 699 Count | 155 Count | 0 VDC | 0 VDC |
| 1792369858 | 170 Count | 672 Count | 149 Count | 0 VDC | 0 VDC |
| 1792368057 | 164 Count | 647 Count | 144 Count | 0 VDC | 0 VDC |
| 1792366257 | 157 Count | 622 Count | 138 Count | 0 VDC | 0 VDC |
| 1792364456 | 151 Count | 590 Count | 133 Count | 0 VDC | 0 VDC |
| 1792362655 | 141 Count | 561 Count | 124 Count | 0 VDC | 0 VDC |
| 1792360855 | 135 Count | 537 Count | 119 Count | 0 VDC | 0 VDC |
| 1792359054 | 128 Count | 508 Count | 113 Count | 0 VDC | 0 VDC |
| 1792357253 | 119 Count | 469 Count | 105 Count | 0 VDC | 0 VDC |
| 1792355453 | 112 Count | 421 Count | 99 Count | 0 VDC | 0 VDC |
| 1792353652 | 104 Count | 386 Count | 92 Count | 0 VDC | 0 VDC |
| 1792351851 | 97 Count | 362 Count | 86 Count | 0 VDC | 0 VDC |
| 1792350050 | 91 Count | 337 Count | 81 Count | 0 VDC | 0 VDC |
| 1792348249 | 84 Count | 310 Count | 75 Count | 0 VDC | 0 VDC |
| 1792346449 | 78 Count | 283 Count | 70 Count | 0 VDC | 0 VDC |
| 1792344648 | 70 Count | 251 Count | 63 Count | 0 VDC | 0 VDC |
| 1792342848 | 62 Count | 221 Count | 56 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 1, 0
V_Ext: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)